DIRTMAG® - Decalcifier with magnetic ring, 1" FF

Product detailed description

DIRTMAG® decalcifiers are commonly used in residential and commercial buildings to maintain water quality in heating, plumbing, and irrigation systems. Installers and technicians use these devices to prevent sediment and lime accumulation in pipes, valves, and heat exchangers. The unit is typically installed in the main water supply line before critical components such as boilers, heat pumps, or circulation pumps. It is especially useful in areas with hard water or where water sources contain high levels of suspended solids.

DIRTMAG® is suited for systems where water purity is essential for equipment longevity and operational efficiency. The device helps reduce maintenance frequency by capturing particles that could otherwise cause blockages or wear on system components. It is often integrated into pre-treatment stages of water filtration systems and is compatible with both closed-loop and open-loop water circuits.

Technical parameters

Installation and connection

Installation requires a straight section of pipe before and after the unit to ensure proper flow and separation efficiency. The device is connected using 1 inch FF fittings, which must be properly tightened to prevent leakage. Installers should verify that the flow direction matches the manufacturer's indication on the unit. Common installation mistakes include incorrect orientation, insufficient pipe clearance, or failure to install a bypass for maintenance access. A pressure gauge may be added upstream to monitor system performance and detect potential blockages.

Compatibility and accessories

DIRTMAG® is compatible with standard water supply systems and can be used in conjunction with mechanical filters, sediment traps, and chemical dosing units. For optimal performance, it is recommended to install the unit before additional filtration stages. Accessories such as mounting brackets, sealing rings, and pressure sensors may be required depending on the system configuration. No specific related products are listed for this model.

Technical background for designers

DIRTMAG® operates on the principle of magnetic separation and mechanical filtration. The magnetic ring attracts ferrous particles, while the internal design allows for the settling of non-magnetic solids. The unit is constructed from durable materials suitable for continuous water flow and varying temperatures. Its integration into a system depends on the flow rate and particle load of the water supply. The efficiency of the device is influenced by the velocity of the water and the presence of magnetic and non-magnetic particles. Regular inspection is necessary to ensure the unit remains free of blockages and continues to function effectively.

Service and operation

DIRTMAG® requires periodic inspection to remove accumulated particles from the internal chamber. The frequency of maintenance depends on the water quality and flow conditions. No specific service intervals are provided in the technical documentation. During inspection, installers should check for signs of wear, corrosion, or blockage. The unit should be cleaned using a soft brush or compressed air to remove trapped debris. A visual inspection of the magnetic ring and internal surfaces is also recommended to ensure continued performance.

Frequently asked questions

Can DIRTMAG® be connected to a closed-loop heating system?
DIRTMAG® is suitable for closed-loop systems provided the flow rate and pressure are within the manufacturer's specifications. It helps reduce sediment accumulation in heat exchangers and circulation pumps.

Is DIRTMAG® compatible with copper and plastic piping?
Yes, the device is compatible with copper, plastic, and steel piping. The FF connection ensures a secure fit regardless of the pipe material.

Does DIRTMAG® require a separate power supply?
DIRTMAG® does not require electrical power. It operates passively using the flow of water and the magnetic field generated by the internal ring.

Can DIRTMAG® be used in irrigation systems?
DIRTMAG® is suitable for irrigation systems where water contains suspended particles. It helps prevent clogging of nozzles and filters in drip or sprinkler irrigation setups.