Domestic waterworks MHI 1300 inox / 50 L

Product detailed description

Domestic water pumps are essential components in residential and small commercial buildings where a reliable and continuous water supply is required. These pumps are typically installed in basements, utility rooms, or dedicated pump houses to ensure stable pressure and flow throughout the building. They are commonly used in systems where the water source is at a lower elevation than the point of use, such as in homes supplied from a well or a low-level storage tank. The MHI 1300 inox model is suitable for applications where a high flow rate and significant head are required, such as multi-storey buildings or properties with long pipe runs. It is also appropriate for use in irrigation systems and other non-potable water applications where the pump must handle varying flow demands and maintain consistent performance over time.

When selecting and installing a domestic water pump, it is important to consider the specific requirements of the building and the system. The pump must be capable of delivering the required flow rate and head while operating efficiently and reliably under the expected load conditions. The stainless steel construction of the MHI 1300 inox ensures compatibility with a wide range of water types and reduces the risk of internal corrosion, making it suitable for both potable and non-potable applications. The pump is designed for integration into existing plumbing systems and can be connected to standard electrical supplies, making it a versatile option for a variety of installations.

Technical parameters

EAN	8585054500260
Inlet cable length (m)	1
Maximum flow rate (l/min)	100
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	78x87x45
Pump head (m)	55
Weight	23 kg
Code	PR_16566
Brand	AQUA OLA

The technical parameters of the MHI 1300 inox define its performance and suitability for different applications. The maximum flow rate of 100 l/min indicates the pump's ability to deliver water at a high volume, making it suitable for systems with multiple outlets or high demand. The head of 55 m means the pump can lift water to significant heights, which is important for multi-storey buildings or properties with elevated distribution points. The 230 V operating voltage is standard for single-phase electrical systems in Europe, ensuring compatibility with typical residential and commercial electrical infrastructure. The 1 m inlet cable length and the overall dimensions of 78 x 87 x 45 cm must be considered during installation to ensure sufficient space and proper cable routing.

Installation and connection

Installation of the MHI 1300 inox requires careful planning to ensure proper alignment, secure mounting, and correct electrical connections. The pump should be mounted on a stable, level surface to prevent vibration and ensure long-term reliability. The inlet and outlet connections must be aligned with the existing plumbing system, and appropriate fittings should be used to prevent leaks and ensure a secure connection. The 1 m inlet cable should be routed to the electrical supply, and the pump must be connected to a dedicated circuit with appropriate overcurrent protection. During installation, it is important to check the alignment of the pump and the integrity of the connections to avoid operational issues. Common installation mistakes include improper mounting, incorrect electrical connections, and failure to account for the pump's dimensions and cable length.

Compatibility and accessories

The MHI 1300 inox is compatible with a wide range of plumbing systems and can be integrated into both new and existing installations. It is suitable for use with standard pipe sizes and connection types, and it can be connected to a variety of water sources, including wells, storage tanks, and municipal supplies. To ensure optimal performance, it is recommended to install the pump with appropriate accessories such as pressure switches, flow meters, and check valves. These components help to regulate the pump's operation, monitor flow conditions, and prevent backflow. Additional accessories such as mounting brackets, electrical enclosures, and control panels may also be required depending on the specific application and installation requirements.

Technical background for designers

The MHI 1300 inox operates on the principle of centrifugal pumping, where the impeller generates a pressure differential that moves water through the system. The pump's design allows for efficient operation over a wide range of flow and pressure conditions, making it suitable for both constant and variable load applications. When integrating the pump into a system, it is important to consider factors such as the total dynamic head, pipe friction losses, and the required flow rate to ensure proper sizing and performance. The pump's operating characteristics, including its flow rate and head, are influenced by the system's hydraulic conditions and the properties of the water being pumped. Proper system design and component selection are essential to maximize the pump's efficiency and service life.

Service and operation

Regular maintenance is essential to ensure the continued performance and reliability of the MHI 1300 inox. This includes periodic inspection of the pump's components, such as the impeller, seals, and bearings, to identify signs of wear or damage. The electrical connections should also be checked for signs of overheating or corrosion, and the pump should be tested to ensure it is operating within its specified parameters. During operation, it is important to monitor the pump's performance and check for any unusual noise, vibration, or changes in flow rate. If any issues are detected, the pump should be inspected and serviced as necessary to prevent further damage and ensure continued operation. The absence of specific service intervals in the technical data means that maintenance should be performed based on the pump's usage and the conditions in which it operates.

Frequently asked questions

Can the MHI 1300 inox be connected to a standard electrical supply?
Yes, the pump operates at 230 V and is compatible with standard single-phase electrical systems in Europe.

Is the pump suitable for use with potable water?
Yes, the stainless steel construction makes it suitable for both potable and non-potable water applications.

What is the maximum height the pump can lift water?
The pump can lift water to a height of 55 m, making it suitable for multi-storey buildings and elevated distribution points.

What is the recommended mounting procedure for the pump?
The pump should be mounted on a stable, level surface to prevent vibration and ensure long-term reliability.