IVAR.IVC21 - 90° MF press bends

This category includes 90° press curves with one plug-in end from the IVAR.IVC21 range. These bends are manufactured from carbon galvanized steel and feature EPDM O-rings for sealing. They are suitable for use in heating systems, permanently watered sprinkler systems, compressed dry air, inert gases, and industrial applications. The operating temperature range is from -20 °C to +85 °C, with a maximum of +120 °C. The fittings are designed for PN 16 pressure ratings and must be installed using a pressing tool with a pressing indicator up to 54 mm.

Available sizes include 15 x 15, 18 x 18, 22 x 22, 28 x 28, 35 x 35, 42 x 42, 54 x 54, 76.1 x 76.1, 88.9 x 88.9, and 108 x 108. These fittings are not suitable for systems requiring surface coatings that may be affected by the materials used.

How to choose

• Select the correct size based on the pipe dimensions and flow requirements of the system.
• Ensure compatibility with the pressing tool and pressing indicator up to 54 mm.
• Verify that the system operating conditions (temperature and pressure) fall within the specified range (-20 °C to +85 °C, max +120 °C, PN 16).
• Confirm that the system does not require surface coatings that could be affected by the materials used in the fitting.

Frequently asked questions

What is the maximum operating temperature for IVAR.IVC21 press curves?
The maximum operating temperature is +120 °C, with a normal range of -20 °C to +85 °C.

Are these fittings compatible with surface coatings?
No, these fittings do not contain substances that limit surface coatings, but they are not suitable for systems where surface coatings are required.