IVAR.IVC23 - 45° MF press bends
The IVAR.IVC23 45° MF press bend category includes press fittings with one plug-in end, designed for use in heating systems, permanently watered sprinkler systems, compressed dry air, inert gas and industrial applications. These bends are manufactured from carbon galvanized steel and feature EPDM O-rings for sealing. The operating temperature range is from -20 °C to +85 °C, with a maximum of +120 °C. The fittings are suitable for PN 16 pressure ratings and are available in a range of sizes from 15 x 15 to 108 x 108.
Each fitting includes a pressing indicator for visual confirmation of correct installation and must be pressed to ensure leak-tight performance. They are not suitable for use in systems where surface coatings are sensitive to substances that may limit their integrity.
How to choose
- Select the correct size based on the nominal diameter of the pipe system (e.g., 15 x 15, 22 x 22, up to 108 x 108).
- Ensure compatibility with the system pressure rating (PN 16) and operating temperature range (-20 °C to +85 °C, max +120 °C).
- Confirm that the fitting is suitable for the intended media (heating water, dry air, inert gases, or industrial fluids).
- Verify that the fitting is compatible with the press tooling and pressing method used in the installation.
- Check that the fitting is not intended for use in systems with surface coatings sensitive to chemical interactions.
Frequently asked questions
What is the maximum operating temperature for IVAR.IVC23 bends?
The maximum operating temperature is +120 °C, with a standard range of -20 °C to +85 °C.
Can these bends be used in dry air or inert gas systems?
Yes, the IVAR.IVC23 bends are suitable for use in compressed dry air and inert gas systems as specified in the product description.
What is the purpose of the pressing indicator on the fitting?
The pressing indicator provides a visual confirmation that the fitting has been correctly pressed, ensuring a leak-tight connection up to 54 mm.
