Arch 45° MF, 35 x 35

Product detailed description

This 45° press elbow is commonly used in closed heating systems, fire suppression, refrigeration, and industrial air systems. It is suitable for applications where a directional change is required without the need for welding or threaded connections. The fitting is ideal for HVAC systems, solar installations, and pressurised water circuits in commercial and industrial buildings. It ensures a secure and leak-free connection when used with compatible press tools and EPDM sealing rings.

Installers working on central heating, fire protection, or industrial piping systems will find this fitting suitable for environments with fluctuating temperatures and high-pressure conditions. The elbow is designed for use in closed-loop systems where the media is water, dry air, or inert gases. It is not certified for potable water applications.

Technical parameters

Material	carbon galvanized steel
Operating temperature	-20 °C
Nominal pressure	PN 16
Resistance to high pressures up to	16 bar
Weight	0.128 kg
Code	IVC23.35
Brand	IVAR

The operating temperature range of -20 °C to +120 °C makes this fitting suitable for both cold and hot media applications. The PN 16 rating indicates it can handle continuous pressures up to 16 bar, which is essential for sizing in high-pressure systems. The material selection ensures compatibility with a wide range of fluids and gases, while the press connection eliminates the need for additional sealing materials.Installation and connection To install the Arch 45° MF IVC23.35, ensure the pipe ends are clean and free from burrs. The fitting is designed for use with Type M jaws and requires a press tool compatible with the specified dimensions. The press connection should be made until the molding indicator is fully engaged, ensuring a secure and leak-free joint. Common installation errors include using incorrect jaw types or failing to check the molding indicator. Always verify the correct alignment and press depth to avoid misalignment or incomplete sealing.Compatibility and accessories This press elbow is compatible with other IVAR press fittings and carbon galvanized steel piping systems. It requires a press tool with Type M jaws for installation. No additional surface coatings or sealing agents are required, but the EPDM O-ring must be in good condition to ensure a proper seal. No related products are listed for this model.Technical background for designers The Arch 45° MF is a directional change fitting used in pressurised systems. It is made from carbon galvanized steel, which provides resistance to corrosion and mechanical damage. The EPDM O-ring ensures a tight seal and is suitable for a wide range of temperatures and media types. The press connection method eliminates the need for welding or threading, reducing installation time and potential for leaks. The PN 16 rating allows for integration into high-pressure systems, and the material properties ensure long-term durability in both indoor and industrial environments.Service and operation No specific maintenance is required for this fitting during normal operation. However, it is important to inspect the press connection periodically for signs of wear or leakage. If the molding indicator is damaged or the joint appears loose, the fitting should be replaced. As the fitting is not certified for drinking water, it should not be used in potable water systems. No service intervals are specified in the technical data.Frequently asked questions

Can the Arch 45° MF IVC23.35 be used in solar heating systems?
Yes, the fitting is suitable for solar heating systems as it can handle temperatures up to +120 °C and is compatible with pressurised water circuits.

Is the fitting compatible with inert gases?
Yes, the EPDM O-ring and carbon galvanized steel construction make it suitable for use with inert gases in industrial applications.

Can this elbow be used in fire suppression systems?
Yes, the fitting is suitable for fire suppression systems as it can handle high pressures up to 16 bar and is compatible with pressurised water.

Is the fitting suitable for use with dry air systems?
Yes, the material and sealing properties make it suitable for dry air applications in industrial and HVAC systems.