IVAR.IVC70 - long 90° press bends

The IVAR.IVC70 category includes 90° long press bends designed for use in heating systems, permanently watered sprinkler systems, compressed dry air, inert gas, and industrial applications. These bends are manufactured from carbon galvanized steel and are suitable for temperatures ranging from -20°C to +85°C, with a maximum of +120°C when fitted with an arch. The fittings are intended for use with a pressing tool and include a pressing indicator for accurate installation up to 54 mm. The range includes sizes from 15 x 15 to 88.9 x 88.9 mm.

These fittings are designed to ensure leak-tight connections when properly pressed and are compatible with systems requiring PN 16 pressure ratings. They are suitable for use in closed-loop heating systems and industrial piping where reliable, long-lasting connections are essential.

How to choose

• Select the correct size based on the nominal diameter of the pipe system (e.g., 15 x 15 mm to 88.9 x 88.9 mm).
• Ensure compatibility with the pressing tool and pressing indicator for accurate installation.
• Verify that the application temperature does not exceed +120°C when using the arch-fitted version.
• Confirm that the system pressure does not exceed PN 16.
• Use only with carbon galvanized steel pipes to ensure material compatibility.

Frequently asked questions

What is the maximum operating temperature for IVAR.IVC70 bends?
With the arch fitted, the maximum operating temperature is +120°C. Without the arch, the limit is +85°C.

Can these bends be used in dry air or inert gas systems?
Yes, the IVAR.IVC70 bends are suitable for compressed dry air and inert gas applications.

Are these fittings compatible with all pressing tools?
They must be used with a pressing tool compatible with the pressing indicator and the specified pipe size.