Jump starter CARCLEVER 35970

Product detailed description

The latest generation of the powerful and multifunctional jumbo starter - the hybrid auxiliary starter - is ideal for emergency starting of cars and boats with dead or damaged car batteries.

Just connect the clamps to the car battery/starter, wait about 120 seconds and you can start the engine.

The new generation consists of capacitors with a backup lithium battery that recharges only the capacitors.

The lithium battery (4400 mAh) is automatically activated if the vehicle battery is too weak to charge the capacitors.

Absolutely maintenance-free, no need to recharge during storage
instant start of the vehicle with a dead battery (minimum energy balance of 10%)
starting the vehicle without battery (internal battery must be recharged via micro USB before use)
starting the vehicle without battery (must be recharged via CL cable from another vehicle before use)
no loss of performance at low temperatures
no loss of performance due to ageing (10 000 uses)
LED work light (2x powerful LEDs)

Specifications:Battery can be used if required:

max. starting current 400 A (800 A) at temperatures from - 40⁰C to + 65⁰C (suitable for all petrol and diesel engines - not suitable for diesel engines with keyless start)
USB 5 V / 2 A output for the possibility of powering external devices (mobile phones, tablets, etc.)
Dimensions (W x D x H): 130 mm x 50 mm x 195 mm
cable and clamp length: 500 mm

Use: If necessary, it can also be used for other purposes, such as:

Connect the clamps to the battery.
2. press the ON/OFF button, wait approximately 120 s
3. start the engine

How does Jumpstart recharge?

Immediate use (lasts approximately 120 s)
1. connect to a discharged battery
2. press ON/OFF, the device gets the remaining energy from the battery and stores it in the ultracapacitor

How is the Jumpstart recharged from the internal battery?

Immediate use (lasts approximately 120 s)
1. press ON/OFF
2. then hold ON/OFF, the device gets power from the internal battery and stores it in the ultracapacitor

Precharging:

from another 12 V battery = connect the Jumpstart to the battery and press START, the Jumpstart will fully charge in about 120 s
from the USB connector = Jumpstart can be recharged from any USB port 5 V / 2 A, full recharge takes about 15 minutes (just connect the micro USB cable, recharging will start automatically)
from a 12 V socket = Jumpstart - the starting station can be recharged in any car with a 12 V socket (just connect the 12 V adapter, charging starts automatically, full recharging takes about 120 s)

Contents of the package:

powerful and multifunctional Jumpstart
cable adapter with CL connector / DC connector
USB/micro USB cable adapter
Side wrench 10 mm / 12 mm
Instructions for use

Warning:

With a maximum starting current of 400 A, it is suitable for most petrol vehicles up to a displacement of 3000 cc and for diesel vehicles up to approximately 2000 cc. It is not suitable for starting diesel vehicles with keyless start (e.g. Volvo XC60), where there is a system that measures the current battery capacity before starting.

With larger volumes there is a higher starting current, so the station requires support from the car battery (remaining battery capacity of at least 10%) and it is not possible to start a fully discharged car battery from the starting station alone.