Luminaire STU LED8cob3C working

Product detailed description

Rechargeable LED work/recreational lamp. As a light source it has 3W COB LED module + 1W front LED. Structurally, the COB LED is made up of individual chips, placed on a flat joint and covered with a layer of phosphor, forming together a homogeneous illuminating surface. These modules then emit light almost continuously over the entire surface. By mounting directly on the aluminium plate, the modules heat up less and thus extend their lifetime significantly. The mounting lamp has a practical design with a swivel base (180⁰) and magnets. An indisputable advantage is the absence of a cable, which in many cases is the reason for falling and damaging conventional fluorescent lamps.

- versatile use, from the equipment of garages and service vehicles to a handy luminaire in the home.

Technical parameters:

- light source: 3 W COB LED module + 1 W LED
- luminous flux: max. 400 lm + 70 lm front luminaire
- light colour: 7000 - 8000 K
- illumination angle: 120º
- battery type: li-pol 3.7 V 2200 mAh
- uSB-C 5 V/1 A charging input
- includes USB-C charging cable
- charging time: approx. 2.5 h
- overcharge/over-discharge protection
- illumination time: 2.5 h main luminaire, 9 h front luminaire
- working temperature: -20 - +40 ⁰C
- protection class: IP20
- size: 243 x 52 x 40 mm
- material: rubberised ABS plastic
- integrated pull-out hook + 2x magnet for attachment
- works in extreme heat and cold