Parking camera BLOW BVS-548

Product detailed description

Parking camera BLOW BVS-548
Wired reversing camera and two Blow parking sensors mounted in the license plate frame, designed for installation in cars and vans. The camera is designed to transmit an actual image behind the vehicle, which will definitely make parking and reversing in places with limited visibility much easier.

Camera in number plate frame
The modern way of mounting the camera in the license plate frame will definitely facilitate quick and efficient installation in our vehicle. We don't have to worry about preparing extra space for the camera in the car or interfering too much with the appearance and modifications.

Parking sensors
In addition to the camera, there are also parking sensors in the number plate frame - meaning that all the important elements supporting reversing and parking are in one place.

Technical parameters:

Image sensor: 1/3.6 inch CMOS
Resolution: 648x488
Measuring area: 4.9 x 3.7
Lens: F = 1.9 mm / F = 2.0
Signal system: PAL
Horizontal synchronization (kHz): 15625/15734
V-Sync (Hz): 50/60
Automatic gain control and backlight control: YES
Horizontal resolution: 480 TV lines
Minimum illumination: 0.01 lux
Signal/noise: < 48.0 [dB]
Viewing angle of image sensor: 170 degrees
Horizontal viewing angle: 120°
Vertical viewing angle: 90°
Diagonal viewing angle: 165°
Waterproof class: IP67
Voltage range: DC 9-15V
Video output: 1.0 Vp-p / 75 Ω
Operating temperature: -20~+70°C, RH 95% Max
Storage temperature: -30~+80°C, RH 95% Max