Single hole steel clamp with rubber 3"

Product detailed description

Single hole steel clamps are essential components in the installation of pipe systems, particularly in industrial, commercial and residential buildings. These clamps are used to secure pipes to structural supports, walls or ceilings, ensuring that the system remains stable and vibration-free. In heating and plumbing systems, they help maintain alignment and prevent movement that could lead to stress on joints or connections. Installers working on HVAC, hot and cold water supply, or drainage systems will find these clamps useful for supporting pipes in vertical and horizontal runs. The URG80 model is particularly suited for larger diameter pipes, where secure fastening is critical to system integrity.

When installing such clamps, it is important to consider the external diameter of the pipe, the spacing between supports, and the type of load the system will bear. The URG80 is designed for use with pipes that have an external diameter between 88 and 98 mm, making it suitable for 3 inch nominal pipe sizes. The clamp’s 135 mm arm length allows for secure attachment to structural supports, ensuring that the pipe remains in place under normal operating conditions. The galvanized steel construction provides corrosion resistance, while the rubber lining ensures a tight, non-marring grip on the pipe surface.

Technical parameters

The technical parameters of the URG80 clamp are essential for selecting the correct size and ensuring compatibility with the pipe system. The 3 inch size refers to the nominal pipe size, while the external diameter range of 88–98 mm defines the actual pipe sizes that can be accommodated. The 135 mm arm length is important for determining the spacing between supports and the overall stability of the system. The galvanized steel construction and rubber lining are key factors in the clamp’s durability and sealing performance.

Installation and connection

Installation of the URG80 clamp involves positioning the clamp around the pipe and securing it to a structural support using appropriate fasteners. The clamp should be aligned with the pipe’s axis to ensure even pressure distribution and prevent distortion. The arm length of 135 mm allows for secure attachment to supports, but installers should ensure that the fastening points are strong enough to bear the load. It is important to check that the clamp fits snugly around the pipe without over-tightening, which could damage the rubber lining or the pipe surface. Common installation mistakes include using the wrong size clamp, misalignment of the clamp with the pipe axis, and insufficient tightening of the fasteners, which can lead to movement or vibration.

Compatibility and accessories

The URG80 clamp is compatible with a wide range of pipe materials, including steel, copper, and plastic, provided the external diameter falls within the specified range. It is typically used in conjunction with standard mounting hardware such as screws, bolts, and wall anchors. When installing multiple clamps along a pipe run, it is important to ensure even spacing to maintain system stability. No additional accessories are required for basic installation, but installers may need to use pipe supports or hangers for larger or heavier systems.

Technical background for designers

The URG80 clamp operates by gripping the pipe through the combination of galvanized steel and rubber. The galvanized steel provides structural strength and corrosion resistance, while the rubber lining ensures a secure, non-marring grip on the pipe surface. This design allows the clamp to maintain a stable hold without damaging the pipe. In system design, the clamp’s dimensions and material properties are important for determining the spacing between supports and the overall stability of the system. The external diameter range of 88–98 mm ensures that the clamp can accommodate variations in pipe size, making it suitable for a wide range of applications. The clamp’s performance is also influenced by the type of load the system will bear and the environmental conditions in which it will operate.

Service and operation

During operation, the URG80 clamp requires minimal maintenance. However, it is important to periodically inspect the clamp for signs of wear, corrosion, or loosening of the fasteners. If the rubber lining becomes damaged or worn, it should be replaced to maintain a secure grip on the pipe. The galvanized steel construction provides long-term durability, but in environments with high humidity or chemical exposure, additional protective measures may be necessary. There are no specific service intervals provided for this model, but regular inspections are recommended to ensure continued performance.

Frequently asked questions

Can the URG80 clamp be used with copper pipes?
Yes, the URG80 clamp is suitable for use with copper pipes provided the external diameter is within the specified range of 88–98 mm. The rubber lining prevents damage to the pipe surface.

What is the maximum load capacity of the URG80 clamp?
The maximum load capacity is not specified in the technical data. It is recommended to follow the manufacturer’s guidelines for load distribution and support spacing.

Is the URG80 clamp suitable for vertical pipe installations?
Yes, the URG80 clamp is suitable for vertical pipe installations. The 135 mm arm length provides sufficient support for vertical runs, provided the fastening points are secure.

Can the URG80 clamp be used in high-temperature environments?
The clamp is suitable for use in standard temperature environments. For high-temperature applications, it is recommended to consult the manufacturer’s technical data sheet for specific recommendations.