Single hole steel clamp with rubber 4"

Product detailed description

This single-hole steel clamp is used to secure 4 inch diameter pipes in industrial and commercial installations. It is commonly applied in heating, plumbing, sanitary, pump and irrigation systems where reliable pipe support is required. The clamp is typically installed in mechanical rooms, under floors, in wall cavities and in ducts. It is used by installers, contractors and service technicians to ensure the stability and alignment of piping systems.

The clamp is designed to accommodate a range of pipe diameters within the specified outer diameter range. It is suitable for both new installations and retrofit applications. The galvanised steel construction provides resistance to corrosion, while the rubber lining ensures a secure and vibration-dampening grip on the pipe. The clamp is installed using standard tools and requires no special training.

Technical parameters

Installation and connection

Installation begins with measuring the pipe's outer diameter to confirm it falls within the 108–116 mm range. The clamp is then positioned around the pipe, ensuring the rubber lining is in full contact with the pipe surface. The arm is adjusted to the required length and tightened using a wrench. It is important to ensure the clamp is evenly tightened to avoid uneven stress on the pipe.

Common installation mistakes include using the wrong size clamp for the pipe diameter, failing to fully seat the rubber lining against the pipe, and over-tightening the clamp, which can cause deformation. Installers should also check that the clamp is compatible with the type of pipe being used and that it is suitable for the operating conditions of the system.

Compatibility and accessories

This clamp is compatible with a wide range of pipe materials, including steel, copper and plastic. It is typically used in conjunction with other pipe support components such as hangers, brackets and expansion joints. For larger systems, multiple clamps may be required to ensure even distribution of load and to prevent sagging or vibration.

When installing this clamp, it is important to ensure that the supporting structure is strong enough to bear the weight of the pipe and its contents. Additional accessories such as mounting brackets or wall anchors may be required for overhead or wall-mounted installations. No specific related products are listed for this model.

Technical background for designers

The clamp operates by applying pressure around the circumference of the pipe to hold it in place. The galvanised steel frame provides structural strength, while the rubber lining ensures a secure and non-marring grip. The design allows for flexibility in positioning and adjustment during installation.

The galvanised steel is resistant to corrosion and can withstand exposure to moisture and chemicals commonly found in plumbing and heating systems. The rubber material is chosen for its elasticity and ability to conform to the pipe surface, reducing the risk of damage. The clamp is designed to integrate seamlessly into existing piping systems without requiring modifications to the pipe or surrounding structure.

The service life of the clamp is influenced by factors such as the operating temperature, exposure to chemicals and the frequency of vibration. Proper installation and regular inspection can help extend the service life and ensure continued performance.

Service and operation

Regular inspection of the clamp is recommended to ensure it remains securely fastened and that the rubber lining is intact. Any signs of wear, deformation or loosening should be addressed promptly to prevent potential issues. The clamp does not require lubrication or special maintenance under normal operating conditions.

During operation, the clamp should be checked for signs of stress or fatigue, particularly in high-vibration environments. If the pipe is subjected to thermal expansion or contraction, the clamp should be inspected to ensure it remains in the correct position and that the pipe is not restricted in its movement. No specific service intervals are provided for this model.

Frequently asked questions

Can the Hydroland URG100 be used with plastic pipes?
Yes, the clamp is compatible with plastic pipes provided the outer diameter is within the specified range of 108–116 mm. The rubber lining ensures a secure grip without damaging the pipe surface.

Is the clamp suitable for overhead installations?
Yes, the clamp can be used for overhead installations. However, additional support such as mounting brackets or wall anchors may be required to ensure the clamp is securely fastened to the supporting structure.

Can the clamp be adjusted after installation?
Yes, the clamp can be adjusted after installation to accommodate changes in pipe alignment or to fine-tune the positioning. The arm length and tightening mechanism allow for some flexibility in adjustment.

What is the maximum load capacity of the clamp?
The maximum load capacity is not specified in the technical data. It is recommended to follow the manufacturer's guidelines for load distribution and to use multiple clamps for heavy-duty applications.