Submersible sludge pump IBO WQF 550

Product detailed description

Submersible sludge pumps are essential components in drainage systems where the removal of contaminated water, sludge and surface water is required. The IBO WQF 550 is commonly used in residential and commercial properties for basement water removal, in civil engineering projects for dewatering excavations, and in municipal applications for handling surface water from rivers, ponds and swimming pools. Installers typically encounter this equipment in situations where water accumulation poses a risk to structural integrity or operational continuity. The pump is designed for direct submersion in the liquid medium and is not suitable for abrasive media such as sand-laden water.

When installing the IBO WQF 550, it is important to consider the specific hydraulic conditions of the site. The pump is intended for use with liquids at temperatures up to 35 °C and ambient temperatures up to 70 °C. It is not recommended for environments with high particulate content, particularly sand, as this can lead to mechanical wear and reduced service life. The pump is connected to a power supply via a 5 m supply cable and must be integrated into a system with appropriate electrical protection and control devices.

Technical parameters

EAN	5907222763254
Length of supply cable (m)	5
Maximum flow rate (l/min)	300
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	43x24
Pump head (m)	10
Weight	15 kg
Code	PR_38657
Brand	IBO

The technical parameters of the IBO WQF 550 define its performance and suitability for specific applications. The maximum flow rate of 300 l/min indicates the volume of liquid the pump can move per minute, while the 10 m head specifies the maximum vertical lift it can achieve. The 230 V supply voltage is standard for single-phase electrical systems in many European countries. The dimensions and weight are important for handling and installation in confined spaces. These parameters are essential for sizing the pump correctly and ensuring compatibility with the hydraulic and electrical requirements of the system.

Installation and connection

Installation of the IBO WQF 550 requires careful planning to ensure safe and efficient operation. The pump must be fully submerged in the liquid medium to prevent dry running, which can cause overheating and damage to the internal components. The 5 m supply cable should be routed to a suitable power source with appropriate circuit protection, including a residual current device (RCD) for safety. The pump is connected to the discharge pipe using standard thread types, and the connection must be checked for tightness to prevent leaks. Common installation mistakes include incorrect cable routing, failure to secure the pump in position and improper alignment of the discharge pipe. It is also important to ensure that the pump is not installed in areas with high particulate content, as this can lead to blockages and mechanical failure.

Compatibility and accessories

The IBO WQF 550 is compatible with standard drainage and water removal systems. It can be integrated with control panels, level sensors and timers to automate operation and improve efficiency. Additional accessories such as flexible couplings, check valves and strainers may be required to ensure smooth flow and prevent backflow. The pump is not designed for use with abrasive media, so it is important to ensure that the system is configured to handle the specific characteristics of the liquid being pumped. No related products are available for this model.

Technical background for designers

The IBO WQF 550 operates on the principle of centrifugal pumping, where the impeller generates a pressure differential to move the liquid. The pump is constructed from durable materials to withstand the corrosive and abrasive nature of sewage and surface water. The motor is sealed to prevent water ingress and is designed for continuous operation under the specified temperature conditions. The integration of the pump into the system must consider the hydraulic load, pipe friction losses and the required flow rate. The service life and efficiency of the pump are influenced by factors such as the quality of the liquid, the frequency of use and the maintenance regime. Regular inspection and cleaning of the pump are essential to prevent clogging and ensure optimal performance.

Service and operation

Regular maintenance is essential to ensure the continued performance of the IBO WQF 550. The pump should be inspected periodically for signs of wear, corrosion or blockages. The electrical connections should be checked for tightness and insulation integrity. The discharge pipe and fittings should be examined for leaks or damage. No specific service intervals are provided in the technical data, but it is recommended to perform routine checks in accordance with the manufacturer's guidelines. During operation, the pump should be monitored for unusual noise, vibration or temperature changes, which may indicate mechanical or electrical issues. If any anomalies are detected, the pump should be shut down and inspected by a qualified technician.

Frequently asked questions

Can the IBO WQF 550 be used for pumping sand-laden water?
No, the pump is not suitable for use with water containing sand or other abrasive particles. This can cause mechanical wear and reduce the service life of the pump.

What is the maximum temperature of the liquid that can be pumped?
The pump is designed for use with liquids at a maximum temperature of 35 °C. Exceeding this temperature may affect the performance and longevity of the pump.

What is the length of the supply cable?
The pump is supplied with a 5 m supply cable. This allows for flexible installation in various locations.

Is the IBO WQF 550 suitable for use in flooded basements?
Yes, the pump is commonly used for removing water from flooded basements. It is designed to handle sewage and surface water efficiently.