Submersible sludge pump MWQ 50/3000 with agitator

Product detailed description

Submersible sludge pumps are essential in pumping stations handling raw sewage, sludge and contaminated water. These systems are commonly found in municipal wastewater treatment plants, industrial facilities and commercial buildings where solids and sediments are present in the flow. Installers working with these environments must consider factors like solids handling, pump head and cable length to ensure reliable operation. The IBO MWQ 50/3000 is designed for such conditions, offering a high head and flow rate to manage challenging pumping tasks. Its agitator function helps prevent clogging by breaking down dense deposits, making it suitable for continuous operation in difficult environments.

When selecting a submersible sludge pump, installers must assess the hydraulic requirements of the system, including the required flow rate and head. The pump must be compatible with the existing piping and electrical infrastructure, and the cable length must be sufficient for the installation depth. The IBO MWQ 50/3000 is engineered for integration into these systems, with a 5 m cable length and 400 V power supply. Its stainless steel shaft and double mechanical seals provide resistance to corrosion and mechanical wear, ensuring long-term performance in aggressive environments.

Technical parameters

The technical parameters of the IBO MWQ 50/3000 define its suitability for specific applications. The 620 l/min flow rate and 31 m head indicate its ability to handle high-volume pumping tasks in systems with vertical lift requirements. The 5 m cable length must be considered in relation to the installation depth and the need for secure electrical connections. The 400 V power supply is typical for industrial and commercial installations, and the dimensions (56 x 26 x 21.5 cm) determine the space required for installation and maintenance.

Installation and connection

Installation of the IBO MWQ 50/3000 requires careful planning to ensure proper positioning and secure electrical connections. The pump should be placed in the sump or tank at a depth that allows full submersion and avoids air intake. The 5 m cable must be routed to a suitable power source, ensuring that the 400 V supply is compatible with the pump’s electrical requirements. Installers should verify the integrity of the cable insulation and the stability of the mounting to prevent movement or vibration during operation. Common installation mistakes include insufficient submersion, incorrect cable routing and failure to check the mechanical seals for leaks before commissioning.

Compatibility and accessories

The IBO MWQ 50/3000 is compatible with standard pumping system components, including sumps, tanks and piping with appropriate connection sizes. It is designed for use with systems that handle raw sewage, sludge and heavily contaminated water. Additional components such as control panels, level sensors and discharge piping may be required depending on the system configuration. Installers should ensure that all components are properly sized and compatible with the pump’s flow and pressure capabilities to avoid performance issues.

Technical background for designers

The IBO MWQ 50/3000 operates by using an internal impeller to mix and crush dense deposits, preventing clogging and ensuring consistent flow. The stainless steel shaft provides resistance to corrosion and mechanical stress, while the double mechanical seals protect the motor chamber from ingress of water and solids. The pump is designed for integration into pumping systems with vertical lift requirements, and its dimensions (56 x 26 x 21.5 cm) must be considered in relation to the available space. The 400 V power supply and 5 m cable length are key factors in the electrical design of the system, and the pump’s flow and head capabilities must be matched to the hydraulic requirements of the installation.

Service and operation

Maintenance of the IBO MWQ 50/3000 involves regular inspection of the mechanical seals, impeller and motor chamber for signs of wear or damage. Installers should check the integrity of the cable insulation and ensure that the pump is operating within its specified flow and pressure range. No specific service intervals are provided in the technical data, but routine checks are recommended to ensure continued performance. Any signs of vibration, noise or reduced flow should be investigated to identify potential issues such as clogging or mechanical failure.

Frequently asked questions

Can the IBO MWQ 50/3000 be used in tanks with high concentrations of sludge?
Yes, the pump is designed for use in tanks with high concentrations of sludge and raw sewage. The internal impeller helps to mix and crush dense deposits, preventing clogging and ensuring consistent flow.

What is the maximum depth at which the IBO MWQ 50/3000 can be installed?
The 5 m cable length allows for installation at depths up to 5 m, provided that the pump is fully submerged and the electrical connections are secure.

Is the IBO MWQ 50/3000 compatible with control panels and level sensors?
Yes, the pump can be integrated with control panels and level sensors to automate operation and monitor performance. The 400 V power supply must be compatible with the control system.

How does the stainless steel shaft affect the pump’s durability?
The stainless steel shaft provides resistance to corrosion and mechanical stress, ensuring long-term performance in aggressive environments with raw sewage and sludge.