Surface self-priming pump IBO JSW 150

Product detailed description

Surface-mounted self-priming pumps are commonly used in residential and commercial buildings for water circulation in heating and plumbing systems. The IBO JSW 150 is designed for dry installation environments and is typically used in systems where a reliable and efficient pump is required to maintain pressure and flow. It is suitable for integration into closed-loop systems, such as underfloor heating or domestic hot water circuits, where a high head is required to overcome system losses. The pump is intended for use by qualified installers and technicians who are familiar with the requirements for electrical and hydraulic connections in such systems.

When installing the IBO JSW 150, it is important to ensure that the pump is positioned in a location that allows for easy access for maintenance and inspection. The pump must be mounted on a stable, level surface to prevent vibration and noise. The system must be free of air pockets to allow the pump to prime effectively. The pump is not suitable for use with aggressive or abrasive media, and the installation must comply with local electrical and plumbing regulations.

Technical parameters

EAN	5907222763506
Length of supply cable (m)	1
Maximum flow rate (l/min)	80
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	41x21x19
Pump head (m)	46
Weight	11.5 kg
Code	PR_38716
Brand	IBO

The IBO JSW 150 is rated for a maximum head of 46 m and a flow rate of 80 l/min. These parameters are essential for determining the suitability of the pump for a specific system. The 230 V power supply requires a dedicated circuit with appropriate protection. The dimensions of 41 x 21 x 19 cm must be considered when planning the installation space. The 1 m supply cable length should be factored into the electrical layout to ensure sufficient reach to the power source.Installation and connection The IBO JSW 150 is a surface-mounted pump and must be installed in a dry location. The pump is connected to the system using standard pipe connections, and the inlet and outlet ports must be aligned with the system piping. The 1 m power cable must be connected to a 230 V supply with a suitable circuit breaker. Before commissioning, the system must be checked for leaks and air pockets. A common installation mistake is failing to ensure the pump is level, which can lead to vibration and premature wear. The pump must also be protected from freezing in unheated areas.Compatibility and accessories The IBO JSW 150 is compatible with standard heating and water supply systems that operate on 230 V. It is typically used in conjunction with expansion vessels, pressure switches, and temperature sensors to ensure system stability. Additional accessories such as isolation valves, filters, and pressure gauges may be required for full system functionality. No related products are listed for this model.Technical background for designers The IBO JSW 150 operates on the principle of centrifugal pumping, where the impeller creates a pressure differential to move water through the system. The pump is constructed from durable materials suitable for use with clean water. The design allows for efficient operation at high head and moderate flow rates. The integration into the system must account for the pump's dimensions and the required clearance for maintenance. The service life and efficiency of the pump are influenced by the quality of the installation, the condition of the system, and the regularity of maintenance checks.Service and operation The IBO JSW 150 requires regular inspection to ensure it is operating correctly. The pump should be checked for signs of wear, such as leaks or unusual noise. The electrical connections must be inspected for damage or corrosion. No specific service intervals are provided in the technical data. The pump should be disconnected from the power supply before any maintenance is carried out. The system should be drained and flushed periodically to remove debris and prevent blockages.Frequently asked questions

Can the IBO JSW 150 be used in a closed-loop heating system?
Yes, the pump is suitable for use in closed-loop systems such as underfloor heating or domestic hot water circuits where a high head is required.

What is the maximum head of the IBO JSW 150?
The pump is rated for a maximum head of 46 m, making it suitable for systems with significant pressure losses.

Is the IBO JSW 150 suitable for outdoor installation?
No, the pump is designed for dry indoor environments and must be protected from moisture and freezing conditions.

What is the length of the power cable supplied with the IBO JSW 150?
The pump is supplied with a 1 m power cable, which must be connected to a 230 V supply with a dedicated circuit breaker.