system insulation boards
IVAR.TB 20 P 05 - without waterproofing film
- laying distance 75 / 150 / 225 / 300 mm
- usable size 1200 x 600 mm = 0.72 m2
- for pipes with an external dimension of 16, 17 and 18 mm
- for thermal insulation of floor heating without protective film (white), for ALPEX or PEX pipes
IVAR.TH 15 P, IVAR.TH 30 P - with protective waterproofing film
- IVAR.TH 30P - laying spacing 75 /150 /225 /300 mm usable size 1200 x 600 mm = 0.72 m2
- IVAR.TH 15P – laying spacing 50 /100 /150 /200 /250 /300 mm usable size 1000 x 500 mm = 0.50 m2
- for pipes with an external dimension of 16, 17 and 18 mm
- for thermal insulation of floor heating with increased thermal resistance and hardened
- walking foil (black), for ALPEX or PEX pipes
IVAR.COMBITOP ND 10 N, IVAR.COMBITOP ND 30 N - with protective waterproofing film
- laying spacing 50 /100 /150 /200 /250 /300 mm
- usable size 1400 x 800 mm = 1.12 m2
- for pipes with an external dimension of 16, 17 and 18 mm
- for thermal insulation of floor heating with increased thermal resistance and hardened walking film (black), for ALPEX or PEX pipes.
IVAR.TR 01-RENOVA, IVAR.TR 02-RENOVA - dry system
- IVAR.TR 01 RENOVA - system insulation board
- laying distance 167 / 250 / 333 mm
- usable size 1000 x 500 mm = 0.5 m2
- for thermal insulation of floor heating without protective foil, locks for installation of reflective plates only for pipes Ø 16 mm ALPEX or PEX
IVAR.TR 02 RENOVA - reflective plate
- size 1000 x 120 x 0.4 mm
- reflection sheet for IVAR.TR 01-RENOVA system board for pipe Ø 16 mm ALPEX or PEX, to increase heat transfer, material
- galvanized sheet, perforated every 250 mm for easy division
- recommended use: for underfloor heating with a low building height, for minimizing the static load of the structure during
- renovations, for installation in wooden buildings where it is not possible to apply mortar mixtures
Bestsellers
5 items total
