T-kus brass 1/2 "

Product detailed description

This brass T-piece is commonly used in residential and commercial building installations to create a branch in a piping system. It is suitable for use in heating, plumbing, and sanitary applications where a reliable and durable connection is required. The T-piece is typically installed by plumbers, heating engineers, and service technicians during the assembly or repair of pipe systems. The internal female thread design allows for straightforward connection to other threaded components such as valves, pipes, or fittings.

Due to its maximum operating pressure of 1.5 MPa and maximum temperature of 110°C, it is suitable for use in systems such as hot and cold water supply, central heating circuits, and underfloor heating. The brass construction ensures resistance to corrosion and mechanical stress, making it ideal for long-term use in a variety of environments.

Technical parameters

Installation and connection

The T-piece is connected using internal female threads (FFF), which require matching male-threaded pipe ends or fittings. The 1/2 inch thread size is standard in many plumbing and heating systems. During installation, it is important to ensure that the threads are clean and free of debris to prevent leaks. Apply a suitable sealing compound or thread tape to the male threads before tightening the connection. Over-tightening should be avoided to prevent thread damage or distortion of the brass fitting. A common mistake is using the wrong thread type or size, which can lead to improper sealing and system failure.

Compatibility and accessories

This brass T-piece is compatible with standard 1/2 inch threaded components such as pipes, valves, and other fittings. For a complete installation, additional components such as straight pipes, elbows, or valves may be required. When assembling a system, ensure that all components are of the same material and thread type to maintain compatibility and system integrity. Related products include other brass fittings such as elbows, couplings, and unions.

Technical background for designers

The T-piece functions as a branching point in a piping system, allowing the flow of fluid to be divided or combined. The brass material offers good mechanical strength and resistance to corrosion, making it suitable for use in both hot and cold water systems. The internal female threads ensure a secure and leak-free connection when properly assembled. The performance and service life of the T-piece depend on the quality of the installation, the cleanliness of the threads, and the compatibility of the connected components. The maximum pressure and temperature ratings are key factors in system design to ensure safe and efficient operation.

Service and operation

During operation, the T-piece requires minimal maintenance. Regular checks should be performed to ensure that the connections remain tight and leak-free. If a leak is detected, the system should be depressurised and the connection inspected for damage or wear. No specific service intervals are required for this component. In the event of a failure, the T-piece should be replaced with a new fitting of the same type and specifications.

Frequently asked questions

Can this T-piece be used in a hot water system?
Yes, it is suitable for hot water systems with a maximum operating temperature of 110°C.

What thread type does the T-piece have?
It features three internal female threads (FFF) for connecting male-threaded components.

Is it compatible with copper pipes?
Yes, as long as the copper pipes have matching male threads and are properly sealed during installation.

What is the maximum pressure rating of the T-piece?
It is rated for a maximum pressure of 1.5 MPa, suitable for most domestic and commercial systems.