Victron Energy 48V/3000VA Smart voltage converter

Product detailed description

The Victron Energy Smart voltage converter is an efficient and reliable voltage converter built on a proven and field-tested inverter platform, but in a new design with an all-metal housing. It is powerful enough to power most common appliances in a car, boat, RV or home. The toroidal transformer provides high peak power surge capacity, stable voltage, frequency and high quality sine wave. Main Features: Easily accessible terminals: Installation is easier than ever because the terminals are now more accessible to the installer. Built-in Bluetooth: - fully configurable via tablet or smartphone, configure alarms, alarm relays, voltage interrupts, output voltage, frequency, eco-mode and more directly from the app from VictronConnect. - low battery voltage alarm - low battery shutdown and restart levels - dynamic shutdown: load-dependent shutdown level - output voltage: 230 VAC ±2% - frequency: 50 Hz or 60 Hz - eCO mode on/off and ECO mode sensing level - alarm relay - monitoring: input and output voltage, load and alarms VE.Direct Using the VE.Direct port, you can connect to a computer (VE.Direct to USB interface cable required) and configure and monitor the same parameters. Proven reliability The full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature. High starting performance Required to start loads such as inverters for LED bulbs, halogen lamps, refrigerators or power tools. ECO mode In ECO mode, the inverter switches to standby mode when the load drops below the preset value. In standby mode, the inverter switches on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote switch or relay contact can be connected to the two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus or the L terminal (right) of the two-pole connector can be switched to battery minus. LED diagnostics The status LEDs can be used to diagnose the device, see the instruction manual. Victron Connect The VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port. Technical parameters: - output voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1% - continuous power at 25 oC: 3000 VA / 2400 W - peak power: 6000 W - max. efficiency: 95% - self-consumption at zero load: max. 15 W - self-consumption at zero load in ECO mode: max. 2.8 W - 230 V AC connection: screw terminals - operating temperature range: -40 to +65oC (fan-assisted cooling) - humidity (non-condensing): max. 95% - protection class: IP21 - weight: 19 kg - dimension: 485 x 285 x 150 mm