Anti-corrosion spray NANOPROTECH Electric 150ml

Product detailed description

Anti-corrosion spray NANOPROTECH ELECTRIC 150 ml
NANOPROTECH Electric sprays will protect all electrical systems from oxidation, moisture, short circuits and leakage current. Thanks to advances in nanotechnology, they can significantly extend the life of equipment, saving on maintenance, service and repair costs. In addition, they can also dislodge moisture from water-damaged devices, restoring their function and, moreover, protecting them from further corrosion.

How do Nanoprotech Electric sprays work?

Our sprays contain nanoparticles that, when applied, will bond to the metal surface and form an impenetrable insulating barrier. This displaces moisture and prevents oxidation. In addition, it will insulate the conductors and thus prevent the electric current from leaking into the surrounding humid environment, thus preventing short circuits. The nanoparticles can penetrate the already existing corrosion layer, trapping it directly on the metal surface and thus facilitating its removal. It is suitable for all metal surfaces and for both low and high voltage contacts. In addition, the 300 ml volume variant, officially named GNP Electric Professional, not only delivers twice the volume, but above all a professional applicator with both short and long application tubes for more practical application.

- Protects against short circuit

Electrical components treated with NANOPROTECH Electric will be insulated with a thin layer of nanoparticles that will perfectly protect them from moisture. If water gets into the treated equipment, it will not short circuit and destroy it. In addition, it will be protected from further oxidation and work safety will be significantly increased, especially in humid environments. This will prevent serious accidents caused by electric shock.

- Protects against oxidation

When wetting occurs in electrical devices, oxidation occurs, which gradually degrades the device. However, NANOPROTECH Electric prevents this. It can even be applied to an already corroding surface and thus effectively rid it of oxidation. It is therefore ideal for treating and restoring the function of electrical devices that have reached the limits of their service life due to moisture and corrosion.

- First aid for drowned electronics

When water gets into an electrical appliance, it leads to its rapid destruction. Unless the untreated device is fatally damaged by water, NANOPROTECH Electric can restore its function. If you experience a similar situation, disassemble the device as soon as possible and treat it with NANOPROTECH Electric spray. The nanoparticles will displace moisture and preserve the surface within fifteen minutes. As a result, your electronics will last longer than before and will also remain protected from oxidation.

- Renews contacts_mRenews contacts

With older electronics, the contacts often break, most often due to oxidation or the presence of moisture. If you encounter a similar problem, treat the broken contacts with NANOPROTECH Electric spray. The nanoparticles will help clean and bond the oxidized contacts, thus extending the life of the instruments.

- Protects even in aggressive environments

All electrical devices are particularly at risk in chemically aggressive environments. This is particularly evident when in contact with salty humidity, which can be encountered, for example, in seaside areas or in our winter months. However, chlorinated water or acid rain also cause problems. If your instruments are at risk of corrosion, disassemble them and treat them from the inside. This will preserve them and even in harsh conditions then the electrical connections will not lose their function.

Features:

- Acts as anticorrosive and insulating protection
- Withstands temperatures from -80°C to +160°C
- Acts for up to 1 year
- Consumption: approx. 50 ml per 1 m2
- Contents: 150 ml

Where to use the spray?

- RC models (control units, controllers, servos, connectors)
- Outdoor and indoor drawers
- Outdoor and indoor lighting
- Security systems, sensors and sensors
- Garden, workshop and construction machinery
- Low and high voltage distribution
- Alternators, generators, switchgear and fuse boxes
- Batteries and their contacts
- Connectors and contacts of all kinds

How to use the spray?

- Spray application should be carried out in a well-ventilated area and preferably with protective gloves.
- Shake the spray carefully before application
- Spray a continuous layer (from a distance of 20-30 cm) on the surface to be treated or apply directly to the area to be treated
- Wait 10-15 minutes after application and then wipe off the excess solution