Backup power supply GETI GEP500LF sine 500W (800VA) + battery LiFePO4 100Ah

Product detailed description

A GETI (Emergency Power Supply) system is a device that provides a source of AC power in the event of a power grid failure. You can use the emergency power system as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected equipment is powered directly from the mains, and in the event of an outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. In the event that the power supply is not restored, the emergency power system may shut down when the voltage of the connected battery drops below the factory set level. This is to protect the battery from deep discharge and subsequent damage. The EPS features a clear color display, a pure sine wave voltage converter based on a toroidal transformer and a fast 32-bit processor.

Please note: Only a qualified person may install the system! The contacts of the connected battery must be suitably protected against: contact with persons, foreign bodies, contact with other parts of the system or short-circuiting.

Product Description:

- inverter, UPS, AVR and charger in one device
- clear colour display
- high efficiency due to toroidal transformer design
- high charging current
- protection against overload, short circuit, overcharge and over-polarity.


Technical parameters:

- type of backup batteries: LiFePO4, AGM, GEL
- battery backup voltage: 12V DC
- rated capacity: 800VA
- rated power: 500W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ±3% - 50Hz / pure sine wave
- charging current: 5 A / 10 A optional
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 11V ± 0.3V
- low battery disconnect protection: 10.5V ± 0.3V
- response time: < 4 ms
- cooling: yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10%~90%
- storage temperature: -15°~45°C
- cable length to battery: 2 x 75 cm, M8
- dimension: 138x155x226 mm
- weight: 6,50 kg

LiFePO4 battery Geti

Technical parameters:

- nominal voltage: 12.8 V
- capacity: 100Ah
- energy: 1280Wh
- charging voltage: 14.4V (+/- 0.2V)
- load disconnection: 10V
- charging mode: CC/CV (1st phase constant current, 2nd phase constant voltage)
- recommended charging current: 20A
- max. continuous charging current: 100A
- max. continuous discharge current: 100A
- max. peak discharge current: 200A (5 sec.)
- lifetime: >6000 cycles at 80% DOD
- BMS: integrated
- display: YES
- bluetooth: NO
- self-discharge: ≤2%/month at 25°C
- charging temperature: 0° to 45 °C
- discharge temperature: -20° to 60°C
- storage temperature: -10° to 45°C
- contacts: M8
- protection: IP65
- warranty: 2 years
- dimensions (LxWxH): 330 × 172 × 215 mm
- weight: 10,5 kg

Package: 1pc of backup power supply GETI GEP500LF + LiFePO4 battery 100AH
Package weight: 17kg