DAB.MOTOR 4TW - 4" submersible motors
4" SUBMERSIBLE MOTORS
DAB.MOTOR 4TW
Submersible two-pole asynchronous electric motor with mechanical parts is made of AISI 304 stainless steel. The rotor is bearing in plain radial bearings, the axial load is captured by a robust plain heel bearing. Lubrication and cooling of the radial bearings and the heel bearing pan is by liquid filling. The stator is hermetically sealed in a stainless steel housing filled with a mixture of internal argon-based gases. The winding nodes ( with protective conductor) are routed via a tight connection connector through a flat four-core wire above the pump, where a seamless connection of the actual supply cable is possible. The start-up capacitor is built into the noryl housing under the motor, so that no start-up box is required for the motor.
- Connection: NEMA 4"
- Insulation Class: F
- Protection rating: IP68
- Maximum immersion depth: 300 m
- Possible installation type:
- Vertical or horizontal (horizontal operation 0.5 HP-1.5 HP)
Bestsellers
