Wholesale e-shop

EK adapter for 16 mm diameter PB pipes, HEPWORTH

Code: 912409
Brand: IVAR
–36 % €2,56 / ks
Skladom (2393 ks)

Detailed information

Product detailed description

Fasteners, IVAR.TA 4420, size: 16 x 2 ALU - EK, packing: 40 pcs in bag / 320 pcs in box
- for ALPEX multilayer pipe
  • PN 10, T = +120 °C
  • wrap Eurocone (EC) or M 24
  • material brass CW617N, O-ring - EPDM
  • tightening torque 25 - 35 Nm
  • suitable for ALPEX pipe

For proper fitting of the clamp fitting, follow these instructions:

1. Install the clamp fitting in the order and in the snow as indicated in the following illustrations.

IVAR instructions for clamp fittings

2. Insert the pipe and the appropriate EPDM gasket into the fitting and ensure that everything is clean and that there is no damage to the O-ring.

3. Fit the nut onto the thread and hand tighten, use the appropriate size AC 670 / AC 671 spanner to fully tighten

Rubber parts must not be lubricated with mineral oils under any circumstances, only silicone based lubricant should be used on EPDM material.

Additional parameters

Category: clamping screwing to alpex multi-layer pipe
Warranty: 2 roky
Weight: 0.05 kg
Rozmer balenia (mm): 20/20/20

Be the first who will post an article to this item!

Do not fill out this field:
Vytvořil Shoptet | Design Shoptetak.cz.