Electrohydraulic press - mains operation; 230V IVAR.EFP 203

Product detailed description

This electrohydraulic press is commonly used in residential and commercial plumbing, heating and irrigation systems to perform flaring and compression fitting operations. It allows installers to create secure, leak-tight connections in copper, steel and other compatible piping materials. The compact design and low weight make it ideal for working in tight spaces and for frequent repositioning during installation. The rotating jaw ensures alignment flexibility, reducing the need to adjust the position of the pipe or the tool.

The press is typically used in conjunction with IVAR.PB2 and IVAR.PB4 dies, which are selected based on the pipe size and application requirements. It supports both metric (M15 to M54) and British Standard Whitworth (B16 to B32) thread sizes. The tool’s design supports efficient and accurate forming operations, making it suitable for both new installations and maintenance work.

Technical parameters

Installation and connection

Before use, ensure the press is connected to a stable 230V power supply and that the power cord is undamaged. Secure the appropriate die set for the required pipe size and thread type. Place the pipe into the die and align it with the jaw to avoid misalignment during pressing. Check that the die is seated correctly and that the pipe is fully supported to prevent bending or deformation. Common mistakes include using incorrect die sizes, failing to secure the pipe properly, or applying uneven pressure during the forming process.

Compatibility and accessories

The IVAR.EFP 203 is compatible with IVAR.PB2 dies for M15 to M35 and B16 to B32 thread sizes, and with IVAR.PB4 dies for M42 to M54 threads. It can also be used with dies from other manufacturers after verifying compatibility with the manufacturer. Additional tools such as pipe cutters and deburring tools may be required for complete installation workflows. Ensure all accessories are in good condition and suitable for the intended application.

Technical background for designers

The electrohydraulic press operates using an electric motor that drives a hydraulic pump, generating the force needed to deform the pipe end into the desired shape. The rotating jaw allows angular adjustment, enabling precise alignment with the pipe axis. The tool is constructed from durable materials to withstand repeated use in industrial environments. Factors affecting performance include the quality of the dies, the condition of the pipe material and the accuracy of the setup. Proper integration into the workflow requires careful planning of die changes and tool positioning.

Service and operation

Regular visual inspections should be performed to check for wear, damage or blockages in the hydraulic system. Clean the press after use, particularly around the die and jaw areas, to prevent debris accumulation. Lubrication points should be maintained according to the manufacturer’s instructions. If the press fails to operate smoothly or shows signs of reduced performance, stop use and contact the manufacturer for inspection and repair.

Frequently asked questions

Can the IVAR.EFP 203 be used with non-IVAR dies?
Yes, provided compatibility is confirmed with the manufacturer. Some third-party dies may require adjustments or verification to ensure proper function.

What types of pipe can be processed with this press?
It is suitable for copper and steel pipes within the specified thread ranges. Always verify the material compatibility with the selected dies.

Is the press suitable for overhead work?
Yes, the rotating jaw and low weight make it suitable for overhead applications, though additional support for the pipe may be necessary.

How is the press powered?
It requires a 230V AC power supply and is not battery-operated. A stable power source is essential for continuous operation.