Garden technology
Product sorting
List of products
Pressure regulator with preset output pressure of 1 bar. This mechanical regulator...
500mm cooling jacket for 4" submersible pumps in dug wells or open water tanks to...
Multistage 4" submersible pump 4SD 2/9 with 0.37 kW, optimum flow rate of 1.8...
Multistage 4" submersible pump 4ST 4/10 with 0.75 kW, optimum flow rate of 4.2...
Multistage 4" submersible pump 4ST 4/8 with 0.55 kW, optimum flow rate of 4.2...
Submersible 5" pump 5SV 3/6A with 1.1 kW output with bottom suction, built-in...
The CST Sette Quatro II is a multistage centrifugal submersible pump with an...
The Fox weight is designed to accurately stabilize the float switch in the desired...
Pressure switch PT/12 for single-phase and three-phase submersible pumps, domestic...
Check Valve - The 1" HVDC is used to hold the water column at the pump, saving...
Check Valve - The 5/4" HVDC serves to hold the water column at the pump, saving...
Check Valve - The 6/4" HVDC serves to hold the water column at the pump, saving...
The mounting clamp made of steel is designed to fix the pipe firmly in the...
The RainBird PSI-M30 Preset Outlet Pressure Regulator is designed to provide a...
The PSI-M40 Pressure Regulator with Preset Outlet Pressure is designed to provide...
Pressure regulator with preset output pressure of 3.5 bar. This mechanical...
Polyamide rope - cut in 5bm lengths is designed for hanging the submersible pump...
Polyamide rope designed for hanging the submersible pump in the borehole. The...
Robotic lawnmower Wiper POP 5S up to 500m2 for small and undemanding gardens.
Robotic lawnmower Wiper POP 8S up to 800m2 for small and undemanding gardens.
The Navimow X315E Robotic Lawnmower is suitable for areas up to 1500m² and uses a...
The Navimow X350E Robotic Lawnmower is suitable for areas up to 5000m² and uses a...
The 25uF start-up capacitor is designed for AC induction motors 50/60 Hz. Such...
The 35uF start-up capacitor is designed for AC induction motors 50/60 Hz. Such...
The 40uF start-up capacitor is designed for AC induction motors 50/60 Hz. Such...
The pressure gauge up to 10 bar has a rear 1/4" connection with male thread and is...
The BRIO 2000 MT flow switch is an easy-to-install electrical device for flow...