Hybrid voltage converter CARSPA CARSPA NMS-1500-24 DC/AC 24V/1500W regul. MPPT

Product detailed description

The device is a combination of a pure sine wave inverter, a UPS and an MPPT controller for solar panels. It is thus a backup power supply with backup from the utility grid or generator, battery charger and MPPT controller for solar panels, while the backup priority can be set in reverse, i.e. priority of the utility grid and backup from batteries or PV panels.

- pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase island output without overflows (cannot be connected in parallel to DS)
- clear and adjustable LCD display
- selectable operating modes and power priority
- adjustable operating parameters as required
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and over-discharging of the battery
- possibility of using AGM and GEL batteries or LiFePO4 batteries (only for experienced users)
- if solar power is not available, the battery can be automatically recharged from the mains
- audible warning of faulty status and malfunction
- cold start and power saving function
- powerful active cooling

Specifications:

Mains input voltage: 230V AC ±10% 50Hz
Output: 1 phase, 230V AC +- 5%
Rated inverter power: 1500W / 1500VA
Peak power: 3000VA for 3 sec.
Switching delay: 10 ms (for PC) - 20 ms (for home appliances)
Output waveform: pure sinusoid
Battery voltage: 24 V
Maintenance voltage: 27 V
Battery protection: <32 V
Battery type: AGM, GEL, LiFePO4 (optional, must be set)
Max. max. mains charging current: 40 A
Max. mPPT controller current: 40 A
Max. panel power: 1080 W
Maximum solar panel voltage (Voc): 150 V DC
Operating voltage range of the MPPT controller: 30 - 150 V
Inverter power priority: solar power/UPS/grid battery only
Charging priority: solar/grid/solar + grid/solar only
Self-power consumption: 2 W
Efficiency: 98% (MPPT), 94% (inverter)
Dimensions: 286 x 240 x 91 mm
Operating temperature: 0 to 55 °C
Weight: 3.5 kg
Degree of protection: IP20

Notes:
Output voltage 230 VAC is only available at the output terminal block. The AC OUT socket on the side of the unit is not connected as it does not comply with our standards.

This product requires professional installation.