IVAR.FLO Recessed Installation Box for IVAR.SLI DC 400 Fan Coil – Wall or Ceiling IVAR.FLO

Product detailed description

The IVAR.FLO box (L00569II) is the built-in housing for the concealed IVAR.SLI DC 400 fan coil unit. It is set into the wall or ceiling structure, carries the unit's support brackets and is finished with an IVAR.FLC cover panel, available separately.

Installation options

• vertical in a wall, free horizontal outlet – opening 730 mm high, 142 mm deep and at least 940 mm long, which may start at floor level
• horizontal in a ceiling, free vertical outlet – opening 142 × 730 mm, at least 940 mm long
• horizontal above a suspended ceiling with ducted outlet

Construction

Made of galvanised sheet metal, the box measures 725 × 914 × 142 mm. It is secured to walls with anchor bolts and to ceilings directly; above a suspended ceiling it can also hang from spacer rods. Three insulation panels for the upper inner section are included. Knock-outs let pipes and cables enter from the ceiling, wall or floor, with the fan coil connected on the left or right. Installation should be carried out by a qualified technician.

Technical data

Frequently asked questions

Which fan coil does the IVAR.FLO box L00569II fit?
It is made for the concealed IVAR.SLI DC 400 fan coil unit. Other IVAR.FLO boxes are available for the DC 200, DC 600, DC 800 and DC 1000 sizes.

What size of opening does the box need?
For a wall installation, prepare an opening 730 mm high, 142 mm deep and at least 940 mm long, which may start at floor level. A ceiling opening measures 142 × 730 mm and is also at least 940 mm long.

Who should install the box?
Installation should be carried out by a qualified technician following the instructions for both the box and the fan coil.