IVAR.BIG Filter Bowl O-Ring – Replacement Part MG011220
Code: MG011220Product detailed description
The bowl O-ring keeps an IVAR.BIG filter tight where the bowl meets the head. This genuine IVAR replacement (code MG011220) is designated by the manufacturer for both IVAR.BIG.934 (9 3/4") and IVAR.BIG.200 (20") filter housings.
Replacing the O-ring
- shut off the water supply before dismantling
- unscrew the bowl by hand, or with the IVAR.BIG assembly wrench if it is too tight
- fit the new O-ring and, if due, a new filter cartridge
- place the cartridge in the bowl first, then mount the bowl on the head and hand-tighten
- refill slowly, check for leaks and vent the filter using the valve at the top
Technical data
| Manufacturer | IVAR |
| Product code | MG011220 |
| Type | IVAR.PRISLUSENSTVI |
| Part | bowl O-ring |
| Fits | IVAR.BIG.934 (9 3/4"), IVAR.BIG.200 (20") |
| Quantity | 1 pc |
Frequently asked questions
Does this O-ring fit both 9 3/4" and 20" IVAR.BIG housings?
Yes, IVAR designates part MG011220 for both IVAR.BIG.934 (9 3/4") and IVAR.BIG.200 (20") filter bowls.
What should I do before replacing the O-ring?
Shut off the water supply first. Unscrew the bowl by hand, or use the IVAR.BIG assembly wrench if it is too tight.
How do I put the filter back into service?
Place the cartridge in the bowl, mount the bowl on the head and hand-tighten it. Refill the filter slowly, check for leaks and vent it using the valve at the top.
Additional parameters
| Category: | Filter cartridges - FP3, BIG |
|---|---|
| Warranty: | 2 years |
| Manufacturer: | IVAR |
| Product code: | MG011220 |
| Type: | IVAR.PRISLUSENSTVI |
| Part: | bowl O-ring |
| Fits: | IVAR.BIG.934 (9 3/4"), IVAR.BIG.200 (20") |
| Quantity: | 1 pc |
Discussion
Be the first who will post an article to this item!