IVAR Turatec - MH, disc 20 x 2, 73120225

Product detailed description

This polyethylene pipe is commonly used in residential and commercial heating applications, such as underfloor heating systems and domestic hot water distribution. Installers working on low-pressure systems will find it suitable for environments with continuous temperatures up to +70°C and occasional exposure to +95°C. The material composition includes a polyethylene core with an aluminium layer, providing structural stability and thermal resistance.

Typical installations include central heating systems and radiant floor heating circuits. The pipe is supplied in a 50 m coil and is intended for use with IVAR’s TA, RA or PT press fitting systems. It is important to ensure that the system design accounts for thermal expansion and that the pipe is supported at regular intervals to prevent sagging or misalignment.

Technical parameters

Material	Polyethylene pipes
Operating temperature	+70 °C
Nominal pressure	PN 10
Weight	0.232 kg
Code	73120225
Brand	IVAR

The operating temperature of +70°C and pressure rating of PN 10 define the conditions under which the pipe can be used continuously. At higher temperatures, such as +95°C, the pipe is only suitable for short-term load scenarios. These parameters are essential for determining correct sizing and ensuring long-term system performance.

Installation and connection

The installation process involves cutting the pipe to length using a suitable pipe cutter and ensuring the cut ends are clean and free of burrs. Connections are made using IVAR TA, RA or PT press fittings. For TA and RA fittings, a swaging tool is required to compress the fitting around the pipe. With PT press fittings, a press tool is used to form a secure joint. It is important to verify that the pipe is fully inserted into the fitting before applying the tool. Common mistakes during installation include insufficient insertion depth, incorrect tool pressure and failure to check for leaks after installation. To avoid these issues, always follow the manufacturer's guidelines and conduct a visual and pressure test post-installation.

Compatibility and accessories

This polyethylene pipe is specifically designed for use with IVAR’s TA, RA and PT series fittings. When ordering, ensure that the correct fittings are included to match the installation method. Accessories such as pipe clamps, insulation sleeves and expansion joints may also be required depending on the system layout and local regulations.

Technical background for designers

The pipe consists of a polyethylene core reinforced with an aluminium layer, which enhances its mechanical strength and thermal stability. The outer protective layer is made of high-density polyethylene (PE-HD) and is coloured red for identification purposes. This multi-layer construction ensures good resistance to thermal expansion and minimises heat loss in the system. When integrating into a heating system, designers should account for the coefficient of thermal expansion and ensure proper support and spacing. The service life of the pipe is influenced by the operating temperature and pressure, as well as the quality of the connections and system maintenance.

Service and operation

Routine checks should include visual inspection of the pipe and fittings for signs of wear, corrosion or leakage. Any damaged sections should be replaced immediately. Since the pipe is designed for long-term use, no specific service intervals are required unless indicated by local standards or system performance issues arise.

Frequently asked questions

Can the IVAR Turatec - MH be used with non-IVAR fittings?
No, the pipe is designed specifically for use with IVAR TA, RA or PT fittings to ensure compatibility and leak-free connections.

Is this pipe suitable for outdoor installation?
Only if protected from direct sunlight and extreme weather conditions. UV exposure may degrade the material over time.

What is the maximum allowable temperature for continuous operation?
The pipe is rated for continuous operation at +70°C and can handle short-term exposure to +95°C.

How should the pipe be stored before installation?
Store in a dry, shaded area away from direct heat sources to prevent deformation or material degradation.