Clip - for mounting the pipe IVAR.PROFI-AIR CLASSIC - DN 90 IVAR.CLIP

Product detailed description

The IVAR.PROFI-AIR CLASSIC system is commonly used in residential and commercial buildings for controlled mechanical ventilation with heat recovery. Installers working on such systems often need to secure ducts to walls, ceilings or structural elements to prevent movement and ensure long-term performance. This clip is specifically designed for ducts with a nominal diameter of DN 90, providing a secure and adjustable mounting solution. It is suitable for both new installations and system upgrades, where precise positioning and alignment of ducts are required.

Mounting clips are essential in ventilation systems to prevent sagging, reduce noise from vibration, and maintain the integrity of the ductwork. The clip is typically used in conjunction with standard mounting hardware such as screws and wall anchors. It is designed to accommodate the specific dimensions of the duct, ensuring a snug fit and even load distribution. This helps maintain the efficiency of the ventilation system and prevents air leakage or misalignment over time.

Technical parameters

Nominal diameter	DN 90
Code	GR0984II
Brand	IVAR

The nominal diameter of DN 90 indicates that the clip is compatible with ducts of that size. This is a critical factor when selecting the correct mounting solution to ensure that the clip fits securely and provides adequate support. The clip must be used with ducts of the same nominal diameter to avoid misalignment or mechanical stress on the duct material. The design of the clip allows for easy adjustment during installation, which is important for achieving the correct positioning in complex duct layouts.

Installation and connection

The installation process involves positioning the clip at the desired location along the duct and securing it using appropriate fasteners. The clip is typically attached to a structural element such as a wall, ceiling joist or support beam. It is important to ensure that the clip is aligned with the duct and that the fasteners are tightened to the manufacturer's specifications. Common installation mistakes include using incorrect fasteners, failing to account for thermal expansion or not allowing for sufficient clearance between the duct and surrounding structures. To avoid these issues, the installer should verify the alignment and secure the clip evenly on both sides of the duct.

Compatibility and accessories

This clip is specifically designed for use with the IVAR.PROFI-AIR CLASSIC ducting system. It is not compatible with other duct types or sizes. When installing, it is necessary to use standard mounting hardware such as screws and wall anchors, depending on the surface to which the clip is being attached. No additional accessories are required for basic installation, but installers should ensure that all mounting points are evenly spaced according to the system's design specifications.

Technical background for designers

The clip is made from durable materials suitable for use in mechanical ventilation systems. It is designed to withstand the mechanical stresses associated with duct movement and thermal expansion. The clip's design allows for secure and stable mounting while accommodating slight variations in duct positioning. The integration of the clip into the system ensures that the duct remains in the correct position, which is essential for maintaining airflow efficiency and preventing air leakage. The long-term performance of the clip depends on the quality of the installation and the environmental conditions in which it is used.

Service and operation

The clip requires minimal maintenance after installation. It is important to periodically check the tightness of the fasteners and ensure that the clip remains securely attached to the structural element. Any signs of loosening or misalignment should be addressed promptly to prevent potential issues with the duct's positioning. There are no specific service intervals required for this component, as it is designed for long-term use with minimal intervention.

Frequently asked questions

Can this clip be used with ducts of a different diameter?
No, this clip is specifically designed for ducts with a nominal diameter of DN 90. Using it with a different size may result in improper fit or reduced performance.

What type of fasteners should be used for installation?
Standard screws and wall anchors are typically used, depending on the surface to which the clip is being attached. The installer should follow the manufacturer's recommendations for the specific application.

Is it possible to adjust the clip after installation?
Yes, the clip allows for some adjustment during installation to ensure proper alignment. However, major adjustments are not recommended after the system is fully assembled.

Can the clip be used in both horizontal and vertical duct runs?
Yes, the clip is suitable for both horizontal and vertical installations. The installer should ensure that the clip is properly secured and aligned in both orientations.