Pellet Conveyor Gearbox 25W H0107 for Atmos

Product detailed description

This gearbox is used in pellet-fueled heating systems to drive the conveyor mechanism that feeds fuel into the combustion chamber. It is typically installed in residential and commercial buildings where automated pellet feeding is required. The system integrates with the boiler's control unit to regulate the rate of fuel delivery based on heat demand. Installers and service technicians must ensure that the conveyor is correctly aligned and that the motor is compatible with the boiler's control system. The gearbox is designed for continuous operation in environments with moderate to high dust levels, typical of pellet storage and combustion areas.

When installing this component, the technician must verify that the conveyor belt is tensioned correctly and that the gearbox is mounted securely to prevent vibration and misalignment. The motor must be connected to the correct power supply and control signals. The 25W motor provides sufficient torque for standard pellet conveyors but may require additional support in high-capacity or long-distance applications.

Technical parameters

Designed for pellet conveyors Atmos	DA1500, DA2000, DA2500, DRA25 - 1.3m, DRA25 - 1.7m, DRA25 - DxxPX
Weight	3.128 kg
Code	H0107
Brand	Atmos

The gearbox is specifically designed for the listed conveyor models and must be selected based on the conveyor length and power requirements. The 25W motor is suitable for standard pellet conveyors but should be verified against the system's hydraulic and electrical specifications to ensure compatibility.Installation and connection The installation process begins with verifying the compatibility of the conveyor model and the gearbox. The gearbox must be mounted to the conveyor frame using the provided fasteners. The motor is connected via a standard electrical cable to the boiler's control unit. It is important to ensure that the motor's wiring is not exposed to high temperatures or mechanical stress. Common installation mistakes include incorrect belt tensioning, which can lead to slippage and uneven fuel delivery, and misalignment of the gearbox with the conveyor drive shaft, which can cause premature wear and mechanical failure.Compatibility and accessories This gearbox is compatible with the following conveyor models: DA1500, DA2000, DA2500, DRA25 - 1.3m, DRA25 - 1.7m, and DRA25 - DxxPX. It is designed to work with the standard control systems used in Atmos pellet boilers. No additional accessories are required for standard installations, but installers should verify the condition of the conveyor belt and motor wiring before fitting the new gearbox.Technical background for designers The gearbox operates by converting the rotational motion of the motor into linear movement of the conveyor belt. It is constructed from durable materials that resist wear and corrosion in high-dust environments. The 25W motor provides sufficient torque for standard pellet conveyors but must be integrated with the boiler's control system to regulate fuel delivery. The efficiency of the system depends on the correct alignment of the conveyor belt and the tension applied to it. The service life of the gearbox is influenced by the operating conditions, including dust levels, temperature fluctuations, and the frequency of maintenance checks.Service and operation Routine maintenance includes checking the tension of the conveyor belt and inspecting the motor for signs of wear or overheating. The gearbox should be cleaned periodically to remove dust and debris that can accumulate in the moving parts. There are no specified service intervals in the provided data, but it is recommended to perform a visual inspection during routine boiler maintenance. Any unusual noise or vibration from the gearbox should be investigated immediately to prevent further damage to the conveyor system.Frequently asked questions

Can the H0107 gearbox be used with a DRA25 - 1.7m conveyor?
Yes, the H0107 is specifically designed for use with DRA25 - 1.7m conveyors as listed in the compatibility data.

Is the 25W motor sufficient for a high-capacity pellet boiler?
The 25W motor is suitable for standard pellet conveyors. For high-capacity systems, additional support or a higher power motor may be required.

What should be checked during installation to prevent misalignment?
During installation, the alignment of the gearbox with the conveyor drive shaft and the tension of the belt must be verified to prevent mechanical stress and premature wear.

Can this gearbox be used with a different Atmos conveyor model not listed in the parameters?
No, the H0107 is only compatible with the models specified in the technical parameters. Using it with other models may result in improper operation or damage.