PU adhesive DEN BRAVEN Turbo Speed Combo 750ml

Product detailed description

Turbo Speed COMBO quick-drying PU adhesive is a one-component foam specially developed for fast bonding with a setting time of 60 seconds. Its high adhesion and bonding to various building substrates such as concrete, wood, stone or polystyrene make it ideal for a wide range of applications. Once cured, it is volume stable and produces a high quality, uniform texture.

Features
application by tube and gun
Fast curing, onset of setting after 60 seconds
Correction possible within 2 minutes
360° positioning
high adhesion and bonding to various building substrates
volume stability after curing
high quality, even texture

Application
Concrete, masonry, stone, wood or polystyrene, etc.
Bonding of EPS and XPS boards
bonding of plasterboards, wooden elements, OSB boards, decorative elements and interior partitions
Recommended instructions for use
Dampen the substrate, apply the adhesive to the substrate, dampen again, wait 60 seconds and glue the elements together. But no later than 2 minutes after application. The glued element can be handled for another 60 seconds.

For storage at low temperatures, we recommend tempering the container at room temperature for 1 hour before use. Screw on the application gun and shake the box thoroughly (at least 30 times). Adjust the desired dosage using the locking screw on the application gun.

Volume: 750 ml
Packaging type: pistol container
Colour: yellow

Hazard identification

H222/229 - Extremely flammable aerosol. Container is under pressure: may burst when heated.
H317 - May cause allergic skin reaction.
H319 - Causes severe eye irritation.
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H315 - Irritating to skin.
H332 - Harmful if inhaled.
H335 - May cause respiratory irritation.
H351 - Suspected of causing cancer.
H362 - May cause harm to infants through breast milk.
H413 - May cause long-term harmful effects in aquatic organisms.
H373 - May cause damage to organs by prolonged or repeated exposure.
EUH204 - Contains isocyanates. May cause allergic reaction.
P201 - Ask for special instructions before use.
P210 - Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P211 - Do not spray into open flames or other sources of ignition.
P251 - Do not pierce or burn even after use.
P261 - Avoid inhalation of dust/smoke/gas/fumes/mists/vapours/aerosols.
P263 - Avoid contact during pregnancy and breastfeeding.
P280 - Wear protective gloves/protective clothing/protective goggles/face shield/ear protectors/...
P304/340 - BREATHING: Move the person to fresh air and keep in a position to facilitate breathing.
P501 - Remove contents/packaging ...
Constituents: Chloralkanes, C14-17, Dimethyl ether, 2,2'-dimorpholinyldiethyl ether, diphenylmethanediocyanate, isomers and homologues.

Always follow the information on the product label.