Sealing sleeve for pipe connection - diameter 160mm - action IVAR.PRISLUSENSTVI PN

Product detailed description

Sealing sleeves are essential components in systems involving plastic tanks and pumping equipment. They ensure airtight and watertight connections between pipes and tank fittings. These installations are commonly found in water storage, pumping and irrigation systems, particularly in industrial, agricultural and commercial buildings. Installers and technicians working with IVAR plastic tanks and DAB pumping systems regularly use sealing sleeves to maintain system integrity and prevent leaks.

Correct selection and installation of sealing sleeves are crucial for system performance. The sleeve must match the pipe diameter and be compatible with the tank material and system pressure. This sealing sleeve is specifically designed for 160mm diameter pipe connections and is used in conjunction with plastic tanks and associated fittings.

Technical parameters

Code	L390160
Brand	IVAR

The sealing sleeve is designed for use with 160mm diameter pipes. This dimension is critical for ensuring a proper fit and sealing performance. When selecting this component, it is important to verify that the pipe and tank fittings are also sized to 160mm. The sleeve must be compatible with the tank material and the operating conditions of the system.

Installation and connection

The sealing sleeve is installed between the pipe and the tank fitting to create a secure seal. The pipe should be cut cleanly and inserted into the sleeve until it reaches the stop point. The sleeve must be seated evenly and fully engaged with the pipe and fitting. Common installation errors include misalignment, insufficient insertion depth and improper sealing surface preparation. Always check that the sleeve is undamaged and free from contaminants before installation.

Compatibility and accessories

This sealing sleeve is compatible with IVAR plastic tanks and DAB pumping systems. It is intended for use with 160mm diameter pipes and fittings. When installing, ensure that all associated components, such as pipe fittings and tank inlets, are also sized to 160mm. Additional components such as pipe clamps or support brackets may be required depending on the system design and installation requirements.

Technical background for designers

The sealing sleeve operates by compressing between the pipe and the tank fitting to create a tight seal. It is typically made from a durable elastomer material that provides flexibility and resistance to environmental factors. The sleeve must be compatible with the tank material and the system media to ensure long-term performance. Factors such as temperature, pressure and chemical exposure can affect the sleeve's service life and efficiency. Proper integration into the system design is essential to prevent leaks and ensure system reliability.

Service and operation

Regular inspection of the sealing sleeve is recommended to ensure continued performance. Check for signs of wear, cracking or deformation, and replace the sleeve if any damage is detected. Ensure that the seal remains clean and free from debris that could compromise its integrity. No specific service intervals are provided in the technical data; maintenance should be performed as part of routine system checks.

Frequently asked questions

Can this sealing sleeve be used with other tank brands?
It is specifically designed for IVAR plastic tanks and may not be compatible with tanks from other manufacturers. Always verify compatibility with the tank and fitting specifications.

What pipe diameter is this sealing sleeve suitable for?
This sleeve is suitable for 160mm diameter pipes. It is not compatible with other pipe sizes.

Is this sealing sleeve reusable after removal?
Once removed, the sealing sleeve should not be reused. It is recommended to replace it with a new sleeve to maintain a secure seal.

What materials is this sealing sleeve made from?
The sleeve is made from a durable elastomer material suitable for use with plastic tanks and associated systems. Specific material properties are detailed in the manufacturer's technical data sheet.