UNI-T UT202T clamp-on multimeter

Product detailed description

We offer a 3-year warranty on this product.

UT202T is an easy-to-use smart clamp-on multimeter that can automatically detect most common parameters - AC/DC voltage, AC current, resistance and line continuity. It displays the actual effective rms values.
Capacitance measurement and non-contact voltage (NCV) measurement are selected by pressing the buttons. The UT202T has an unusual design, high reliability and safety, and also an automatic range change available for all functions. The backlit dual LCD display with a maximum display value of ±9999 can simultaneously display voltage/current, voltage/frequency, current/frequency. There is an LED lamp on the underside of the clamping jaws. The power supply is two AAA 1.5V R03 batteries.
The multimeter is designed according to safety standards EN61010-1/61010-2-032 and electromagnetic compatibility EN61326-1/EN61326-2-2 and conforms to CAT III 600V, double insulation and pollution degree II.

Product Parameters :

- measurement of AC/DC voltage, AC current, resistance, capacitance and circuit continuity
- voltage and current frequency measurement on the auxiliary display
- non-contact electric field sensing (NCV)
- multi-segment backlit dual LCD display
- audible and optical alarm
- protection against voltages greater than 600V on all ranges
- automatic range switching
- accuracy is guaranteed within 5% to 100% ranges
- built-in LED luminaire
- powered by two AAA 1.5V R03 batteries


Technical parameters :

To ensure measurement accuracy, the operating temperature should be between 18°C - 28°C

1. AC current measurement ( ranges / resolution / accuracy ) :

9.999A / 0.001A / 50Hz to 60Hz ±(2.5%+30)
99.99A / 0.01A / 50Hz to 60Hz ±(2.5%+5)
600.0A/0.1A/50Hz to 60Hz ±(2.5%+5)
- minimum identifiable current: 0.01A
- the frequency display in AC current measurement is indicative if the current amplitude is ≥ 1Arms at a frequency of 40Hz to 100Hz
- overload protection at 600 Arms


2. AC voltage measurement ( range/resolution/accuracy ):

9.999V / 0.001V / 40Hz to 400Hz ±(0.8%+3)
99.99V / 0.010V / 40Hz to 400Hz ±(0.8%+3)
600.0V/0.1V/40Hz to 400Hz ±(0.8%+3)
- the frequency display on the auxiliary display when measuring AC voltage is indicative if the input voltage has an amplitude ≥ 5Vrms at a frequency of 40Hz to 1000Hz. For frequency above 400Hz, the accuracy is not specified.
- input impedance approx. 10MGΩ
- overload protection at 600Vrms
- minimum identifiable voltage of 0.6V


3. DC voltage measurement ( range / resolution / accuracy ):

9.999V / 0.001V / ±(0.5%+3)
99.99V / 0.01V / ±(0.5%+3)
600V / 0.1V / ±(0.5%+3)
- input impedance approx. 10MΩ
- overload protection at 600Vrms
- minimum identifiable voltage of 0.6V


4. Resistance measurement ( ranges / resolution / accuracy ):

999.9Ω / 0.1Ω / ±(0.8%+3)
9.999kΩ / 0.001kΩ / ±(0.8%+3)
99.99kΩ / 0.01kΩ / ±(0.8%+3)
999.9kΩ / 0.1kΩ / ±(0.8%+3)
6.000MΩ / 0.001MΩ / ±(1.5%+3)
- overload protection at 600 Vrms
- open circuit voltage approx. 1V


5. Capacitance measurement ( ranges / resolution / accuracy ):

99.99nF / 0.01nF / ±(4.0%+10)
999.9nF / 0.1nF / ±(4.0%+10)
9.999nF / 0.001μF / ±(4.0%+5)
99.99μF / 0.01μF / ±(4.0%+5)
999.9μF / 0.1μF / ±(4.0%+5)
9.999mF / 0.001mF / ±(10.0%+10)
99.99mF / 0.1mF / ±(10.0%+10)
- overload protection at 600 Vrms


6. Circuit continuity check:

- When the resistance measured is ≤30Ω, the circuit is in a good state of conductivity, the buzzer beeps and the LED indicator lights green. If the measured resistance is ≥70Ω (disconnected circuit), the buzzer makes no sound and the LED lights red. If the circuit resistance is between 30Ω and 70Ω, the status is not defined.

- open circuit voltage about 3.0V
- overload protection at 600 Vrms


7. Non-contact electric field sensing (NCV):

- allows to detect live wires acoustically by buzzer and optically by LED


Other parameters :

- pliers opening: 28mm
- measurement of maximum and minimum values: yes
- data hold (HOLD): yes
- low battery indication: yes, if the battery voltage is less than 2.4V, if the battery voltage is less than approx. 2.2V, the device cannot be switched on
- automatic power off: yes, the multimeter will turn off automatically if no button is pressed within 15 minutes. This function can be deactivated as required.
- drop resistance: yes, 1m
- electromagnetic compatibility: RF≤1V/m overall accuracy = specified accuracy +5% of range, if RF>1V/m then accuracy is not specified
- operating altitude: ≤2000m
- operating temperature and humidity: 0 to +30 °C (≤ 80% RH), 30 to 40 °C (≤ 75% RH), 40 to 50 °C (≤ 45% RH)
- storage temperature and humidity: -20 to +60°C (≤ 80%RH)
- recommended calibration interval: 1 year
- power supply: 2pcs 1.5 V battery (R03)
- product dimensions: 201.5 × 47 × 28.5mm
- uT202T weight: approx. 241g (including batteries);
- product colour: red and grey


Contents of the package :

- clamp multimeter UT202T: 1pc
- test cables: 1 pair
- battery 1.5 V (R03): 2pcs
- instructions for use: 1pc


Wholesale packaging :

- standard quantity per carton: 40pcs
- standard carton dimensions: 485 x 295 x 385 mm
- standard gross carton weight: approx. 17 kg


Manufacturer :
UNI-TREND
- www.uni-t.cz