Valve fitting, IVAR.AGE 01, 3/4" x 1/2"

Product detailed description

Valve fittings are essential components in heating systems, ensuring secure and leak-free connections between valves and other system elements. Installers and technicians working on residential and commercial heating systems frequently use these fittings to adapt pipe sizes and connect different types of valves. The 3/4 inch to 1/2 inch size is commonly used in radiators, underfloor heating systems and other applications where size transitions are necessary. Proper selection and installation of these fittings are critical for system performance and longevity.

When working with these fittings, it is important to consider the type of valves being connected, the system pressure and the compatibility of the materials. The nickel-plated brass construction provides good corrosion resistance and durability in typical heating environments. Installers should ensure that the fitting is compatible with the valve type and that all connections are tightened to the correct torque to prevent leaks.

Technical parameters

Installation and connection

Installation of the valve fitting involves connecting it to the valve and the pipe using standard threading techniques. The 3/4 inch side connects to the valve, while the 1/2 inch side connects to the pipe or other system component. It is important to use appropriate sealing materials such as PTFE tape or thread sealant to ensure a leak-free connection. Installers should verify that the threads are clean and undamaged before tightening. Common installation mistakes include over-tightening, which can damage the threads, and under-tightening, which can lead to leaks. The fitting is also compatible with Eurocone (EK) connections, providing additional flexibility in system design.

Compatibility and accessories

This valve fitting is compatible with a range of IVAR valves including IVAR.VD, IVAR.VS, IVAR.VCR, IVAR.VCD and IVAR.VCS. It is also suitable for use with IVAR.DD and IVAR.DS control shut-off valves. When installing, ensure that the connected valves and pipes have compatible thread types and sizes. Additional components such as sealing tape or pipe fittings may be required depending on the system configuration. Installers should refer to the manufacturer's technical data sheet for detailed compatibility information and recommended accessories.

Technical background for designers

The valve fitting functions as a size adapter between the valve and the pipe, ensuring a secure and leak-free connection. The nickel-plated brass material provides good mechanical strength and resistance to corrosion in heating environments. The Eurocone (EK) compatibility allows for additional flexibility in system design and installation. The performance and service life of the fitting depend on the quality of the installation, the system pressure and the compatibility with other system components. Proper selection and installation are essential for long-term reliability and system efficiency.

Service and operation

Regular inspection of the fitting is recommended to ensure that the connections remain secure and leak-free. Check for signs of corrosion or wear, especially in areas with high humidity or aggressive media. If any issues are detected, the fitting should be replaced to prevent system failures. No specific service intervals are provided for this component, but it is advisable to inspect it during routine system maintenance. Proper maintenance helps ensure the continued performance and safety of the heating system.

Frequently asked questions

Can this fitting be used with thermostatic valves?
Yes, the fitting is compatible with thermostatic valves such as IVAR.VD, IVAR.VS, IVAR.VCR, IVAR.VCD and IVAR.VCS.

Is the fitting suitable for Eurocone (EK) connections?
Yes, the fitting can be connected to armatures with Eurocone (EK) dimensions, providing additional installation flexibility.

What is the material of the fitting?
The fitting is made of nickel-plated brass CW617N, which offers good corrosion resistance and mechanical strength.

Can this fitting be used with control shut-off valves?
Yes, the fitting is compatible with control shut-off valves such as IVAR.DD and IVAR.DS.