Antenna power supply 12V/300mA with power switch EMOS J5810

Product detailed description

Antenna power supply 12V/300mA, with power switch
The pulse stabilized power supply is designed to power preamplifiers/amplifiers in small antenna systems requiring 12 V DC voltage with a maximum power consumption of up to 300 mA.
The EM-12SP power supply is equipped with F sockets for connecting F connectors, which greatly speeds up and facilitates the installation of the coaxial cable.
The EM-12SP power supply is equipped with a protection circuit against accidental short circuit at the antenna input.
The power supply technologies used reduce power consumption in no-load operation by up to 90% compared to a conventional power supply.
The integrated power switch allows to power the preamplifier/amplifier located in the antenna box, using the same coaxial cable that carries the DVB-T signal to the TV receiver.
The adapter complies with the requirements of international standards ECO-design, CE. These standards guarantee low consumption in "stand-by-mode" without load and thus a reduction of CO2 emissions.
The power supply technologies used reduce power consumption in no-load operation by up to 90% compared to a conventional power supply.
Thanks to its higher efficiency, it can save up to 30% of electricity in normal operation compared to conventional adapters.

Technical parameters:

input voltage: 110-230 V
output voltage: 12 V
output current: 300 mA
standby power consumption: <0.3 W
filter capacitor: 470 µF
power switch: yes
switch input connector: F connector
switch output connector: IEC
through attenuation of the power switch: 1 dB
power cable: 1.5 m
max. output load constant/peak: 300 mA
dimension: 70 × 57 × 23 mm