Backup power supply GETI GEP500 sine 500W + battery 100Ah

Product detailed description

When the power goes out in winter, the pump and the boiler feeder stop working. The GETI GEP500 kit is meant for exactly that situation: it contains an emergency power supply (EPS, Emergency Power Supply) with a pure sine output of 500W and a 100Ah gel lead-acid battery, so once it has been professionally connected, your backup power supply is ready to work.

In normal operation the connected equipment runs straight from the mains. If the mains drops out, the unit switches to inverter mode by itself and powers the load from the battery. Should the power not return and the battery voltage fall to roughly 10.2 V ± 0.3 V, the system shuts down so that the battery is not damaged by deep discharge. You can use it for pumps, automatic boilers, feeders, emergency lighting, camera systems and other equipment.

Key features

• inverter, UPS, AVR and charger in one device
• clear colour display
• voltage inverter with a pure sine output, built around a toroidal transformer and driven by a fast 32-bit processor
• the toroidal transformer contributes to high efficiency
• high charging current
• protection against overload, short circuit, overcharging and reverse polarity

Technical specification of the backup power supply

• AGM, GEL – supported backup battery types
• 12V DC – backup battery voltage
• 800VA – rated capacity
• 500W – rated power
• toroid – transformer type
• 230 V AC, 50 Hz – input voltage
• 230V AC ± 3%, 50 Hz, pure sine wave – output voltage
• 5 A / 10 A (selectable) – charging current
• 13.6 V ± 0.3 V – charging voltage
• 11 V ± 0.3 V – low battery voltage limit
• 10.5 V ± 0.3 V – low battery voltage cut-off
• under 4 ms – response time
• cooling: yes
• 0 to 40 °C – operating temperature
• 10% to 90% – relative humidity
• -15 °C to 45 °C – temperature range for storage
• 2 x 75 cm, M8 – battery cables
• 145x180x237 mm – dimensions
• 6.50 kg – weight

The Geti gel lead-acid battery is particularly well suited to solar and wind energy systems and to caravans. It can also replace the batteries in UPS backup systems, backup power supplies, electronic security systems, EPS applications, telecommunications, and mobile warning and signalling devices. It is a maintenance-free, hermetically sealed battery that can work in any position.

Technical specification of the gel battery

• VRLA (valve regulated lead acid), i.e. a valve-regulated lead-acid battery – manufacturing technology
• GEL – type
• 12 V – voltage
• 100 Ah – capacity
• 328 x 172 x 217 mm – dimensions
• 220 mm – overall height including terminals
• approx. 29.5 kg – weight
• 5 MOhm – internal resistance of a fully charged battery
• under 3% at 25 °C – self-discharge

Package contents

• 1 pc of the GETI GEP500 backup power supply
• lead battery 100 Ah
• 37 kg – packed weight

Warning: the system must be installed by a qualified person only. The terminals of the connected battery have to be covered suitably, so that people and foreign objects cannot touch them and so that contact with other parts of the system or a short circuit cannot occur.