Ball cap gas FUTURGAS - 1 "MF; butterfly FIV.80014 M

Product detailed description

This ball valve is commonly used in gas distribution systems for industrial and commercial buildings, including heating plants, workshops and large-scale ventilation systems. It is installed in gas lines where reliable shut-off and flow control are required. The valve is designed for use in pressurised gas systems operating within the specified temperature range. Installers should ensure that the system pressure and temperature conditions align with the valve's specifications before installation.

The extended internal and external threads allow for secure and leak-proof connections in tight spaces. The butterfly-style design ensures full flow with minimal pressure drop. The nickel-plated brass construction provides resistance to corrosion and wear, making it suitable for long-term use in gas applications. The valve is typically installed in conjunction with other gas system components such as regulators, filters and pressure gauges.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	-20 °C
Nominal pressure	PN 5
Weight	0.472 kg
Code	80014101
Brand	IVAR

The operating temperature range of -20°C to +60°C is suitable for typical gas applications in non-extreme environments. The PN 5 rating indicates that the valve is designed for low-pressure gas systems, which is standard for many industrial and commercial gas installations. The nickel-plated brass CW617N material ensures durability and resistance to corrosion, making it suitable for long-term use in gas systems.

Installation and connection

The valve is connected using a 1 inch MF thread with extended internal and external threading. Installers should ensure that the mating threads on the pipe or fitting are clean and undamaged before installation. Apply a suitable thread sealant or PTFE tape to prevent leaks. The butterfly-style valve should be fully open during installation to avoid damaging the seating surface. After installation, verify that the valve operates smoothly and that there are no leaks at the connection points. A common mistake is failing to align the valve correctly with the flow direction, which can lead to improper sealing and reduced performance.

Compatibility and accessories

This valve is compatible with standard gas piping systems that use 1 inch MF threaded connections. It is typically used in conjunction with gas regulators, pressure gauges and filters to ensure safe and efficient operation. No additional accessories are required for basic installation, but installers may need to order sealing compounds or PTFE tape separately to ensure a leak-free connection. Related products include other ball valves and shut-off valves designed for similar gas applications.

Technical background for designers

The valve operates using a ball with a central bore that allows full flow when aligned with the pipe. The nickel-plated brass CW617N construction provides good mechanical strength and resistance to corrosion, making it suitable for use in gas systems. The extended threading allows for secure installation in tight spaces and ensures a reliable seal. The operating temperature range and pressure rating are critical for system design, as they determine the valve's suitability for different gas applications. The butterfly-style design minimises pressure drop and ensures efficient flow control.

Service and operation

The valve requires minimal maintenance due to its robust construction and simple design. Regular inspections should be carried out to check for leaks, corrosion or wear on the seating surface. If the valve becomes difficult to operate, it may indicate the need for cleaning or lubrication. No specific service intervals are provided, but it is recommended to inspect the valve during routine system maintenance. If any damage or wear is detected, the valve should be replaced immediately to ensure safe operation.

Frequently asked questions

Can this valve be used in water systems?
No, this valve is specifically designed for gas applications and is not suitable for use in water systems. The temperature and pressure ratings are optimised for gas and may not be appropriate for water.

Is this valve suitable for high-pressure gas systems?
No, the valve has a PN 5 rating, which is suitable for low-pressure gas systems. It is not recommended for use in high-pressure gas applications.

Can the valve be installed in any orientation?
Yes, the valve can be installed in any orientation as it does not have a specific flow direction. However, it should be installed in a position that allows for easy access and operation.

What is the maximum operating temperature for this valve?
The maximum operating temperature is +60°C. The valve is not suitable for use in systems with higher temperatures.