Ball cap gas FUTURGAS - 1/4 "MF; butterfly FIV.80014 M

Product detailed description

This ball valve is commonly used in gas supply systems for residential and commercial buildings. Installers working on gas pipelines, heating appliances and metering stations will find this valve suitable for regulating flow in low-pressure gas networks. It provides a tight shut-off and reliable operation under specified conditions. The valve is designed for integration into systems where gas purity and leak resistance are critical.

The compact design allows for installation in tight spaces such as wall cavities, under worktops or within mechanical rooms. It is suitable for both new installations and replacements in existing systems. The extended threaded ends facilitate alignment and secure fitting in standard pipe configurations. This valve supports full-flow operation, reducing pressure loss in the system.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	-20 °C
Nominal pressure	PN 5
Weight	0.142 kg
Code	80014015
Brand	IVAR

These parameters define the valve’s suitability for gas applications. The operating temperature range ensures functionality in cold environments, while the nominal pressure rating indicates the maximum allowable system stress. The material choice ensures resistance to corrosion and wear over time.Installation and connection To install this valve, ensure the pipeline is clean and free from debris. Use a suitable wrench to tighten the male-female threads securely, avoiding over-tightening which could damage the sealing surfaces. The valve is available in 1/4 inch thread size and should be connected between two threaded fittings. Check the alignment of the valve body to ensure smooth operation. A common mistake is incorrect orientation of the valve body, which can restrict flow or cause leakage. Always verify that the sealing surfaces are undamaged before tightening.Compatibility and accessories This valve is compatible with standard gas piping systems using 1/4 inch threaded connections. It is intended for use with gas media and should not be substituted for water or steam applications unless verified by the manufacturer. No additional accessories are required for basic installation, but sealing compounds or PTFE tape may be applied to the threads to enhance the seal. Ensure that the system pressure and temperature remain within the stated limits during operation.

Technical background for designers

This valve operates via a rotating ball with a central bore that aligns or blocks the flow path. The nickel-plated brass CW617N body offers good mechanical strength and corrosion resistance in gas environments. The full-bore design minimises flow restriction and pressure drop. The extended thread length allows for secure engagement with adjacent fittings. Long-term performance depends on maintaining the specified operating conditions and avoiding exposure to aggressive media or excessive mechanical stress.

Service and operation

Periodic visual inspections are recommended to check for signs of wear or leakage around the threads. Ensure that the valve operates smoothly without resistance when rotated. No scheduled maintenance is required under normal operating conditions. If the valve becomes difficult to turn or shows signs of leakage, it should be removed and inspected for damage to the sealing surfaces or internal components.

Frequently asked questions

Can this valve be used in water systems?
No, this valve is rated for gas applications only. The temperature and pressure ratings differ for water use and are not covered in the technical data provided.

Is this valve suitable for outdoor installations?
Yes, provided the installation is protected from direct weather exposure and the operating conditions remain within the specified range.

Can this valve be used with liquefied petroleum gas (LPG)?
Only if the system pressure and temperature match the stated parameters. LPG applications require specific approvals not mentioned in the technical data.

What is the maximum allowable working pressure?
The nominal pressure is PN 5, which means the valve is suitable for systems with pressures up to 5 bar at the specified temperature range.