BRADAS Soaker Hose WAD1 AQUA-DROP 1/2" - 50m

Product detailed description

This soaker hose is commonly used in residential and commercial horticultural applications where controlled and consistent irrigation is required. It is particularly suited for areas such as raised beds, under greenhouse structures, and in orchard settings where drip irrigation is preferred. Installers working on small-scale irrigation systems benefit from the hose’s ability to deliver water directly to plant root zones with minimal runoff. The hose is typically integrated into systems using standard garden taps and hose connections, and is often laid either on the surface or buried just below the soil level for subsurface irrigation. Proper planning of layout and pressure regulation is essential to ensure even water distribution and system longevity.

The hose is designed to operate under low-pressure conditions and is intended for use in systems where water flow is controlled manually or via basic timers. It is not recommended for high-pressure systems or for use with chemical injection units unless specified in the manufacturer’s technical documentation. The hose should be positioned according to the specific layout of the planting area and secured to prevent movement during operation.

Technical parameters

EAN	5907544425755
Weight	4.9 kg
Code	OZ_SH-001125C
Brand	Bradas

The hose is available in a fixed length of 50m and is supplied with a 1/2 inch threaded connection. These parameters are critical for determining compatibility with existing systems and for calculating the number of hoses required for a given area. The micropore design ensures even water distribution, reducing the need for frequent manual watering. The hose’s performance is dependent on the pressure and flow rate supplied by the source, which must be within acceptable limits to avoid over-saturation or insufficient delivery.

Installation and connection

Installation begins with selecting a suitable location based on the planting layout and water source. The hose is connected to a 1/2 inch threaded outlet using a standard garden tap or a dedicated irrigation valve. It is important to ensure that the connection is secure and leak-free. The hose can be laid directly on the ground surface or placed in shallow trenches, depending on the application. When burying the hose, care should be taken to avoid sharp objects that could cause damage. Common installation errors include incorrect pressure settings, failure to secure the hose properly, and using incompatible fittings. A pressure regulator may be necessary in some cases to maintain consistent flow and prevent uneven watering.

Compatibility and accessories

This soaker hose is compatible with standard garden taps and basic irrigation systems that use 1/2 inch threaded connections. For larger or more complex systems, additional components such as filters, valves, and timers may be required to optimise performance. Although no specific alternative products are listed, installers should consider supplementary items such as hose clamps, connectors, and support stakes when planning the installation. These accessories help to stabilise the hose and improve the overall efficiency of the system.

Technical background for designers

The operating principle of this soaker hose is based on the use of evenly distributed micropores that allow water to seep gradually into the surrounding soil. The hose is manufactured using durable materials suitable for long-term outdoor use. The design allows for integration into both surface and subsurface irrigation systems. The effectiveness of the system depends on the uniformity of the pores and the stability of the water supply. Factors such as soil type, slope, and plant density can influence the overall performance and may require adjustments to the layout or pressure settings.

Service and operation

Regular inspection is recommended to ensure the hose remains free of blockages and damage. Any visible signs of wear or leakage should be addressed promptly. The hose should be drained and stored in a dry place during periods of non-use, especially in colder climates where freezing could cause internal damage. No specific service intervals are provided in the brief, so maintenance should be carried out based on visual checks and system performance.

Frequently asked questions

Can the Bradas Soaker Hose be used with a standard garden tap?
Yes, the hose is designed to connect to a standard garden tap with a 1/2 inch threaded connection. A secure fit is essential to prevent leaks.

Is it possible to cut the hose to a shorter length?
Cutting the hose may affect the even distribution of water and is not recommended unless the manufacturer’s technical data sheet provides guidance on modification.

Can the hose be buried directly in the soil?
Yes, the hose can be placed in shallow trenches for subsurface irrigation. However, care must be taken to avoid contact with sharp objects that could damage the hose.

What should be done if the water flow becomes uneven?
Uneven flow may indicate blockages or pressure issues. The hose should be inspected for clogs, and the water pressure should be checked to ensure it is within the recommended range.