CARSPA EBC1260 12V/60A battery charger

Product detailed description

Powerful intelligent automatic lead-acid battery charger with seven-stage automatic charging, designed to be permanently connected to the battery being charged. Suitable for backup power supplies, caravans, island systems etc. Designed for 12V 80-300Ah lead acid starter and traction batteries with liquid dielectric, AGM and AGM GEL (optional). Dual charging output can charge 2 batteries simultaneously.

Charging phase:

C-1 Desulfurization:
Pulsed current charging. This phase starts automatically when the battery voltage is below 11 V and precedes the standard charging cycle.
C-2 Soft start:
Phase of gradual increase of charging current up to a maximum value of 60 A.
C-3 Constant current charging:
A key phase of the charging cycle. Constant current charging until the clamp voltage reaches 14.2 to 14.8 V (selectable in three phases).
C-4 Absorption charging :
Charging at a constant voltage of 14.2 to 14.8 V while gradually reducing the charging current.
C-5 Battery Test:
During the 90-second test, the battery is discharged and the clamp voltage is measured at the same time. If the test is successful, a final, maintenance phase automatically follows. If the test is unsuccessful and the clamp voltage drops rapidly during the test, a 6th stage follows.
C-6Other charging:
In recovery mode, the battery charges for 4 hours at reduced constant current.
C-7 Maintenance mode:
Maintaining battery clamp voltage of 13.2-13.8 V (selectable in three stages).

Specifications:

-Supply voltage 190-265 V
-max. charging current 60A
-for 12V 80-300Ah, AGM and AGM GEL lead acid starter and traction batteries
-temperature compensation of the charging current using the included temperature sensor
-LED display indicating charging status, charging current and voltage and charge level
-efficiency 88 %
-Operating temperature 0-40 °C
-dimensions 226x175x95mm
-supply includes power and charging cable