Corner ball valve - with filter, 1/2" x 3/8"

Product detailed description

Corner ball valves with filters are commonly used in residential and commercial plumbing systems to regulate water flow and protect downstream components from particulate matter. This model is suitable for installation in heating systems, water supply lines, and sanitary applications where a compact, reliable shut-off is required. The valve is designed for use in systems with nominal pressure up to PN 10 and operating temperatures up to 90°C. It is particularly useful in installations where space is limited and a right-angle configuration is needed to connect different pipe sizes.

When installing this valve, the technician must ensure that the system pressure and temperature are within the specified limits. The valve is intended for use with clean water and is not suitable for aggressive or abrasive media. The filter element helps to reduce the risk of clogging in downstream components such as thermostatic valves or flow meters. The compact design allows for easy integration into tight spaces, such as under sinks, in wall cavities, or within mechanical rooms.

Technical parameters

Installation and connection

This corner ball valve is designed for installation using standard pipe connections. The inlet is 1/2 inch and the outlet is 3/8 inch, both with male threads. The technician should verify that the pipe threads are clean and free from debris before installation. Apply a suitable thread sealant to ensure a watertight connection. The valve should be installed in a position that allows for easy access to the handle for operation and maintenance. A common mistake during installation is not aligning the valve correctly with the flow direction, which can lead to restricted flow or premature wear. Always check the system pressure and temperature before commissioning to ensure they are within the valve's operating range.

Compatibility and accessories

This valve is compatible with standard plumbing and heating systems that use 1/2 inch and 3/8 inch threaded connections. It can be used in conjunction with thermostatic mixing valves, flow meters, and pressure-reducing valves. No additional accessories are required for standard installation, but it is recommended to have a set of pipe wrenches and a thread sealant on hand. The valve is not compatible with systems that require higher pressure ratings or temperatures above 90°C. No related products are available for this model.

Technical background for designers

The corner ball valve operates using a spherical disc with a bore that aligns with the flow path when open. The disc is rotated by a stem connected to an external handle, allowing for quick and precise shut-off. The filter element is made from stainless steel AISI 304L and is positioned upstream of the valve body to capture particulate matter before it reaches the seating area. The chromed brass CW617N body provides good resistance to corrosion and wear, making it suitable for long-term use in water systems. The valve is designed to be integrated into systems with standard pipe sizes and can be used in both vertical and horizontal orientations. The service life and efficiency of the valve depend on the quality of the installation, the cleanliness of the system, and the operating conditions.

Service and operation

Regular inspection of the valve is recommended to ensure it remains free from debris and operates smoothly. The filter element should be checked periodically for clogging and cleaned if necessary. No scheduled service intervals are specified for this model, but any signs of leakage or restricted flow should be investigated. If the valve becomes difficult to operate, it may indicate the need for cleaning or replacement of the filter. Always ensure the system is depressurised before performing any maintenance to avoid injury or damage.

Frequently asked questions

Can this valve be used in a hot water system?
Yes, the valve is suitable for hot water systems with a maximum operating temperature of 90°C.

Is the filter removable for cleaning?
The filter is integrated into the valve body and is not designed for removal or replacement by the user.

Can this valve be used in a heating circuit?
Yes, provided the system operates within the specified pressure and temperature limits of PN 10 and +90°C.

What tools are needed for installation?
A standard set of pipe wrenches and a suitable thread sealant are required for installation.