Curved Heated Towel Rail 600 x 1700

Product detailed description

Curved heated towel rails are commonly installed in bathrooms, utility rooms, kitchens and corridors where both functional heating and textile drying are required. These units integrate seamlessly into central heating systems using water as the heat transfer medium, or can be equipped with an optional electric coil for independent operation during off-season periods. The curved profile allows for efficient air circulation around textiles while maintaining a compact footprint.

The vertical orientation of this model makes it suitable for installation in confined spaces such as small bathrooms or cloakrooms. Its steel construction ensures durability under normal indoor conditions and resistance to corrosion when properly maintained. The unit is supplied with mounting brackets, fixing components and a bleed valve to facilitate quick and secure wall installation. The design accommodates both standard forced circulation systems and self-priming gravity-fed systems.

Technical parameters

The nominal width of 600 mm and height of 1700 mm define the physical envelope for planning wall space requirements. The internal 1/2 inch threaded connections determine pipe sizing for the central heating circuit. The working pressure rating of 1 MPa and test pressure of 1.5 MPa indicate suitability for standard domestic heating systems. The maximum operating temperature of 95°C confirms compatibility with conventional boiler outputs.

Installation and connection

Wall mounting requires four plastic brackets included in the delivery. Secure the mounting consoles to the wall using the provided screws and nuts before attaching the radiator. Ensure the mounting depth between 90-120 mm is considered when selecting the installation location. Connect to the heating system using PEX-AL-PEX pipe 16 x 2 mm as recommended, ensuring correct alignment of the 1/2 inch internal threaded ports.

Verify that the bleed valve is positioned at the top of the unit for effective air removal. For electric coil installation, ensure the 1/2 inch port is accessible and that the coil is correctly rated at 600 W. Avoid horizontal mounting as this model is not designed for such orientation. Check that the thermal coefficient of 1.273 is accounted for in system calculations to achieve accurate heat output estimates.

Compatibility and accessories

This curved heated towel rail integrates with standard central heating systems using water or alternative heat transfer media. For electric coil operation, a separate 600 W coil must be ordered separately along with the necessary plug fitting. The recommended connection kit includes all components needed for integration into the heating system. A straight radiator model 600 x 940 is available as an alternative for different spatial requirements.

The unit is compatible with both forced circulation and self-venting systems. Ensure the use of non-freezing mixture if installed in areas prone to low temperatures. The complete installation set includes four plastic brackets, mounting consoles, nuts, screws and a bleed valve to simplify the mounting process.

Technical background for designers

The curved heated towel rail operates by transferring heat from the hot water or electric coil through the steel pipes and profiles to the surrounding air. The 20 mm diameter pipes allow sufficient flow rates for effective heat distribution. The vertical D-profiles of 40 x 30 mm contribute to structural stability while maximising surface area for heat exchange.

The steel construction provides good thermal conductivity and mechanical strength. The reinforced walls of the pipes and profiles enhance resistance to internal pressure and thermal cycling. The powder coating offers protection against corrosion in normal indoor environments. The 9.3 litre water volume affects system response time and energy consumption, requiring consideration in overall system design.

Service and operation

Regular maintenance includes checking the bleed valve for blockage and inspecting the mounting hardware for looseness. In electric coil configurations, verify the secure fit of the coil and the integrity of the electrical connections. Monitor the unit for signs of leaks or corrosion, particularly at connection points and around the bleed valve.

Frequently asked questions

Can the electric coil be installed from both sides?
The design allows for coil installation from either side of the unit.

Is the unit suitable for installation in humid environments?
The powder-coated finish provides adequate protection for use in typical bathroom humidity levels.

What is the recommended pipe size for connection?
PEX-AL-PEX pipe with dimensions 16 x 2 mm is specified for optimal performance.

Can this unit serve as a backup heat source?
With an electric coil installed, it can provide supplementary heating outside the main heating season.