Deburr - UNI - diameter 16-20-26-32mm IVAR.UNI

Product detailed description

During the installation of heating, plumbing, and sanitation systems, it is essential to prepare pipe ends accurately to ensure secure and leak-free connections. This is particularly important when working with ALPEX pipes, which require precise end-face alignment and deburring prior to fitting. The IVAR UNI deburring tool is a key tool in this process, enabling installers to achieve consistent and reliable results across a range of pipe diameters. Whether working on residential, commercial, or industrial projects, the tool ensures that each pipe is properly prepared for connection, reducing the risk of installation errors and future system failures.

Proper pipe preparation is critical in systems where tight tolerances and high-quality connections are required. The tool is commonly used in conjunction with other installation tools and fittings to complete the preparation process efficiently. It is especially useful in applications where multiple pipe sizes are used within the same system, allowing for quick and accurate adjustments without the need for multiple tools.

Technical parameters

Diameter	Ø 16, 20, 26, 32 mm
Weight	0.402 kg
Code	79000213
Brand	IVAR

The tool is available for pipe diameters of 16, 20, 26, and 32 mm. These dimensions are essential for selecting the correct tool to match the pipe being prepared. The diameter range ensures compatibility with a wide range of ALPEX pipe sizes typically used in plumbing and heating systems. The tool is designed for single-size use per diameter, so the appropriate model must be selected based on the pipe size being worked on.Installation and connection To use the IVAR UNI deburring tool, the pipe must first be cut cleanly using a suitable pipe cutter. The tool is then inserted into the pipe end, ensuring that it is fully seated against the internal surface. The deburring and calibration process is performed by rotating the tool within the pipe, which removes any burrs and ensures a flat, even end face. After use, the tool is removed and the pipe is ready for fitting installation. Common installation mistakes include using the tool on incorrectly cut pipe ends or failing to ensure the tool is fully seated before operation. These errors can lead to uneven end faces or incomplete deburring, which may affect the quality of the connection. It is important to check that the tool is the correct size for the pipe and that the pipe end is free from debris before use.

Compatibility and accessories

This tool is specifically designed for use with ALPEX pipes and is not compatible with other pipe types. It is typically used in conjunction with standard pipe cutting tools and fitting installation equipment. No additional accessories are required for basic operation. Related products include pipe cutters and fitting installation tools suitable for ALPEX systems.

Technical background for designers

The IVAR UNI deburring tool operates by rotating within the pipe to remove internal burrs and ensure a flat end face. It is constructed from durable materials suitable for repeated use in professional environments. The tool is designed to integrate into standard installation workflows for ALPEX systems, where accurate pipe preparation is essential for reliable connections. The tool’s effectiveness depends on the quality of the initial pipe cut and the correct selection of the tool size. Regular use on improperly cut or damaged pipes may reduce the tool’s service life.

Service and operation

The tool requires no regular maintenance beyond cleaning after use. It should be inspected for wear or damage before each use to ensure it remains effective. If the tool becomes worn or damaged, it should be replaced to avoid compromising the quality of the pipe preparation. No specific service intervals are provided for this tool, as it is designed for long-term use under normal installation conditions.

Frequently asked questions

Can the IVAR UNI deburring tool be used on non-ALPEX pipes?
No, the tool is specifically designed for ALPEX pipes and is not suitable for other pipe types.

Is the tool suitable for use with all pipe diameters?
The tool is available for pipe diameters of 16, 20, 26, and 32 mm. It must be selected according to the specific pipe size being prepared.

Can the tool be used on damaged or poorly cut pipe ends?
Using the tool on damaged or poorly cut pipe ends may reduce its effectiveness and could result in an uneven end face.

How is the tool removed after use?
After the deburring process is complete, the tool is simply removed from the pipe end by hand. No additional tools are required for removal.