Domestic waterworks IBO MHI 1300 inox / 80L

Product detailed description

This domestic water pump is commonly used in residential buildings, small commercial facilities, and agricultural properties where a stable water supply is required. It is typically installed in water distribution systems, either as part of a dedicated water storage solution or integrated into a central pumping station. The unit is suited for applications such as boosting water pressure, transferring water between tanks, or ensuring consistent flow in low-pressure areas.

Its compact size and robust design make it ideal for installation in utility rooms, basements, or outdoor enclosures. The pump handles cold water only and requires proper alignment with the suction and discharge piping to ensure efficient operation. It is not recommended for use with chemically treated or abrasive fluids unless specified by the manufacturer’s technical documentation.

Technical parameters

The maximum flow rate of 100 l/min and a delivery head of 55 m indicate that this pump is capable of serving medium-sized properties with multiple outlets or requiring elevated water storage. The 230 V power requirement means it must be connected to a standard single-phase electrical supply, and the input cable length of 1 m allows for flexible positioning relative to the power source. These parameters help determine whether the pump can meet the hydraulic demands of the specific installation scenario.

Installation and connection

Installation should begin with verifying the pump’s position relative to the water source and ensuring that all connections are accessible for future maintenance. The pump must be mounted securely on a level surface to avoid vibration-related issues. The suction side requires a non-return valve to prevent backflow and a filter to protect internal components from debris. The discharge pipe should be sized appropriately based on the expected flow rate and system layout.

• Use a 1/2 inch inlet and outlet pipe threads for secure connections.
• Ensure the suction lift does not exceed the pump’s self-priming capabilities.
• Install a pressure gauge and cut-off switch if the system includes automatic control features.
• Verify that the electrical supply matches the 230 V rating and that a dedicated circuit breaker is in place.

A common mistake during installation is neglecting to install a filter on the suction line, which can lead to premature wear of impeller components. Another issue arises when the pump is placed too far from the water source, increasing the risk of cavitation. Always ensure the pump casing is dry and free from condensation after installation.

Compatibility and accessories

The IBO MHI 1300 inox / 80L is compatible with most standard domestic water supply systems and can be integrated with expansion vessels, pressure switches, and flow control devices. For optimal performance, a dedicated pressure tank is recommended to reduce cycling frequency and prolong the motor’s lifespan. Additional accessories such as isolation valves and flow meters should also be considered depending on the system configuration.

When connecting to a larger network, ensure that the pump’s maximum flow rate aligns with the capacity of downstream fixtures and pipelines. If the system includes a timer or remote control module, verify compatibility with the pump’s control inputs. While no related products are listed here, consult the manufacturer’s technical documentation for detailed system integration guidance.

Technical background for designers

The pump operates using a centrifugal mechanism, where an impeller generates kinetic energy to move water through the system. The stainless steel construction provides resistance to corrosion and ensures durability in environments where water quality varies. The sealed motor housing prevents water ingress and maintains operational integrity under normal conditions.

Proper integration into the system involves matching the pump’s hydraulic characteristics with the network’s demand profile. The efficiency of the pump depends on factors such as the viscosity of the fluid, the cleanliness of the suction line, and the condition of the electrical supply. Long-term performance is influenced by regular inspection of the mechanical seal and the absence of air leaks in the suction line.

Service and operation

No specific service intervals are provided in the brief; however, periodic checks of the pump’s operation, including listening for unusual noises and inspecting for leaks, are advisable. Ensure that the pump remains primed and that the suction filter is free from blockages. If the pump fails to start or shows reduced flow, check the electrical connections and the presence of a stable water supply.

During routine maintenance, clean the external surfaces and verify that all fasteners remain tight. If the pump is used in a system with frequent cycling, consider installing a soft-start device to reduce mechanical stress. Replace any damaged or worn components according to the manufacturer’s instructions.

Frequently asked questions

Can this pump handle hot water?
According to the product description, the pump is suitable only for cold water applications. Hot water is not supported unless specified in the technical documentation.

What is the maximum distance between the pump and the water source?
The suction lift should not exceed the pump’s self-priming capability, which is typically limited by atmospheric pressure and the design of the pump’s intake.

Is a pressure tank necessary for this pump?
While not strictly required, a pressure tank helps stabilise the system and reduces the frequency of pump cycling, thereby improving efficiency and extending the motor’s life.

Can the pump be installed outdoors?
If installed outdoors, the pump must be housed within a weatherproof enclosure to protect it from moisture and temperature fluctuations.