Elbow press 90° - male thread, 1" M x 32

Product detailed description

Press elbows are essential components in heating and plumbing systems where directional changes are required. This 90° elbow is commonly used in residential and commercial buildings for connecting ALPEX pipes to threaded fittings. It is suitable for applications involving hot and cold water distribution, underfloor heating, and other pressurised pipe systems. The elbow is designed for use with internal threads and requires a press tool for secure installation. The nickel-plated brass construction ensures durability and resistance to corrosion in wet environments.

When installing press fittings, it is important to ensure that the pipe is clean and free from burrs before pressing. The elbow must be aligned correctly with the pipe and the mating thread to avoid misalignment and leakage. The press operation should be performed according to the manufacturer's guidelines to ensure a leak-tight connection. This elbow is typically used in conjunction with other press fittings and is compatible with standard ALPEX pipe systems.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	+120 °C
Nominal pressure	PN 10
Weight	0.24 kg
Code	511013
Brand	IVAR

The operating temperature of +120 °C and pressure rating of PN 10 make this elbow suitable for hot water and heating applications. The material selection of nickel-plated brass ensures compatibility with water and steam systems. These parameters are critical for determining the suitability of the fitting in specific system designs and for ensuring long-term performance under operational conditions.

Installation and connection

The elbow is connected using a 1 inch male thread and requires a press tool for securing the connection to the ALPEX pipe. The press operation must be performed with the correct tooling to ensure a reliable seal. The connection size is 32 mm, and the thread type is male. During installation, it is important to check that the pipe is straight and that the elbow is aligned with the mating thread. Common installation mistakes include incorrect press depth, misalignment, and failure to clean the pipe before pressing.

Compatibility and accessories

This press elbow is compatible with ALPEX pipe systems and requires a stainless steel sleeve and EPDM seal for the press connection. It is designed to work with press tools suitable for the specified pipe size. No additional products are listed for this model, but the elbow should be used in conjunction with other press fittings and tools for a complete installation.

Technical background for designers

The press elbow operates by forming a mechanical and hydraulic seal between the pipe and the fitting using a press tool. The nickel-plated brass CW617N material provides good mechanical strength and corrosion resistance. The EPDM seal ensures a tight connection and is compatible with the internal thread. The stainless steel sleeve supports the pipe during the pressing process and helps maintain alignment. The elbow's performance is influenced by the quality of the press operation, the condition of the pipe, and the compatibility of the sealing materials with the system media.

Service and operation

No specific service intervals are provided for this model. Regular visual inspections should be carried out to check for signs of wear, corrosion, or leakage. The elbow should be replaced if any damage is detected or if the connection becomes loose. The EPDM seal should be inspected for signs of degradation, particularly in high-temperature applications.

Frequently asked questions

Can this elbow be used with other pipe materials besides ALPEX?
It is specifically designed for use with ALPEX pipes and may not be suitable for other pipe types without confirmation from the manufacturer.

Is the elbow suitable for steam applications?
With an operating temperature of +120 °C, it is suitable for hot water systems but not for high-pressure steam applications.

Can the elbow be used in a system with a pressure higher than PN 10?
It is rated for PN 10 and should not be used in systems with higher pressure without consulting the manufacturer's technical data sheet.

What is the recommended tool for pressing this elbow?
A press tool compatible with ALPEX pipes and the specified pipe size should be used for the installation.