ELIZ EURO 200 | ELZ_3308 | 200 L | Electric Vertical Water Heater

Product detailed description

Electric water heaters are essential components in domestic and commercial hot water systems, particularly in applications where space is limited and vertical installation is preferred. The ELIZ EURO 200 is commonly used in single or multiple-point installations, such as kitchens, bathrooms, and small service areas. It is suitable for integration into standard plumbing systems and can be installed in utility rooms, basements, or behind walls. Installers should consider the electrical requirements and water pressure limits when planning the layout. The unit is designed for environments where a compact, wall-mounted solution is required, and where a consistent supply of hot water is necessary without the need for a large footprint.

When installing the ELIZ EURO 200, the installer must ensure that the mounting surface is structurally sound and capable of supporting the unit's weight of 56 kg. The heater is designed for vertical wall mounting, and the provided bracket must be used for secure installation. The water inlet and outlet are both 1/2 inch threaded connections, and the system must be compatible with a maximum pressure of 6 bar. The electrical supply must be 230 V and capable of handling a 16 A load. The IP24-rated electrical enclosure provides protection against dust and splashing water, making it suitable for use in environments with moderate humidity.

Technical parameters

type	EURO 200
volume	200 L
power	3000 W
voltage	230 V
current	16 A
electrical protection	IP 24
water connection	1/2 inch
maximum tank pressure	6 bar
heating time from 12°C to 65°C	4.2 hours
thermal losses	1.5 kWh/24h
wall mounting	yes
safety fuse	yes
weight	56 kg
product dimensions	W / H / D: 586 x 1255 mm
tank warranty	5 years
product warranty	2 years
EAN	3800035733372
Code	ELZ_3308
Brand	ELIZ

The technical parameters of the ELIZ EURO 200 are critical for proper system sizing and integration. The 200 L tank capacity is suitable for applications requiring a moderate hot water supply, and the 3000 W heating element ensures a relatively quick heating time of 4.2 hours from 12°C to 65°C. The 16 A current draw requires a dedicated circuit with appropriate circuit protection. The IP24 rating indicates that the electrical components are protected from dust and water splashes, but not from immersion or high-pressure jets. The 1/2 inch water connections are standard for most plumbing systems, and the 6 bar maximum pressure must be considered when connecting to the mains supply. The ECO mode reduces energy consumption by limiting the heating temperature to 55°C, which is sufficient for most domestic uses and helps reduce thermal losses.

Installation and connection

Installation of the ELIZ EURO 200 requires a structured approach to ensure safety and efficiency. Begin by selecting a suitable wall location that is level and can support the unit's weight. Secure the mounting bracket to the wall using the provided hardware, ensuring that the bracket is aligned and level. Carefully lift the heater into position and attach it to the bracket. Connect the water supply lines to the 1/2 inch threaded inlets and outlets, using appropriate sealing tape or gaskets to prevent leaks. Ensure that the water supply is turned off before making any connections. Once the water connections are secure, connect the electrical supply to the 230 V, 16 A circuit. The electrical connections must be made by a qualified electrician to comply with local regulations and safety standards. After installation, perform a pressure test to check for leaks and verify that the system operates correctly. Common installation mistakes include incorrect mounting, improper sealing of connections, and failure to check the electrical circuit before energizing the unit.

Compatibility and accessories

The ELIZ EURO 200 is compatible with standard plumbing systems and electrical circuits that meet the specified requirements. It can be integrated with existing hot water distribution systems, provided that the pressure and flow rates are within acceptable limits. The unit includes a built-in safety valve and a return check valve, which are essential for system protection. No additional accessories are required for standard installations, as the unit is supplied with all necessary components for mounting and operation. However, installers should ensure that the electrical circuit is properly protected with a suitable circuit breaker and that the water supply is equipped with a pressure-reducing valve if the mains pressure exceeds 6 bar. The heater is not compatible with systems that require higher pressure or flow rates than those specified in the technical parameters.

Technical background for designers

The ELIZ EURO 200 operates on a simple yet effective principle of electric resistance heating. The heating element is submerged in the water within the tank, and the thermostat controls the temperature by switching the heating element on and off as needed. The tank is constructed from high-quality steel and is coated with a layer of zirconium glaze to protect against corrosion. The 43 mm thick polyurethane insulation, free of CFC, minimizes heat loss and reduces energy consumption. The dual anode protection system, consisting of two magnesium anodes, further extends the tank's lifespan by preventing internal corrosion. The heater is designed for integration into standard electrical and plumbing systems, and its compact size makes it suitable for use in tight spaces. The ECO mode is particularly useful in applications where energy efficiency is a priority, as it reduces the heating temperature and minimizes thermal losses. The IP24-rated electrical enclosure ensures that the unit can be installed in environments with moderate humidity, such as utility rooms or service areas.

Service and operation

Regular maintenance is essential to ensure the long-term performance and safety of the ELIZ EURO 200. The unit is designed for low-maintenance operation, but periodic checks should be performed to ensure that all components are functioning correctly. The anodes should be inspected and replaced if necessary, as they play a critical role in protecting the tank from corrosion. The electrical connections should be checked for signs of wear or damage, and the thermostat should be tested to ensure that it is operating within the specified temperature range. The safety valve and check valve should also be inspected to ensure that they are functioning correctly. The heater is covered by a 5-year warranty on the tank and a 2-year warranty on the overall product. No specific service intervals are provided in the technical documentation, but it is recommended to perform a visual inspection and basic maintenance checks at least once a year.

Frequently asked questions

Can the ELIZ EURO 200 be used in a system with a pressure higher than 6 bar?
No, the maximum operating pressure of the unit is 6 bar. If the mains pressure exceeds this limit, a pressure-reducing valve must be installed to protect the heater.

Is the ECO mode suitable for all applications?
The ECO mode is designed for applications where energy efficiency is a priority. It limits the heating temperature to 55°C, which is sufficient for most domestic uses but may not be suitable for applications requiring higher temperatures.

Can the heater be installed in a location with high humidity?
The IP24-rated electrical enclosure provides protection against dust and splashing water, making the unit suitable for use in environments with moderate humidity. However, it should not be installed in areas with high humidity or direct water exposure.

How long does it take to heat the water from 12°C to 65°C?
The heater requires approximately 4.2 hours to raise the water temperature from 12°C to 65°C, depending on the initial water temperature and the ambient conditions.

Documents for download

• Technical documentation (PDF)