ELIZ EWH 201 Wall-Mounted Air Heater

Product detailed description

Wall-mounted air heaters are commonly used in residential and commercial buildings to provide targeted heating in smaller spaces. The ELIZ EWH 201 is suited for installation in rooms where space is limited but effective heating is required. It integrates into standard electrical systems and is often used in kitchens, bathrooms, offices and workshops. The inclusion of a fan and seasonal ventilation mode also makes it suitable for year-round use in controlled environments.

When installing the EWH 201, the technician must ensure the wall surface is structurally sound and can support the 1.8 kg unit. The heater is powered via a 230 V supply and must be connected to a circuit with a 10 A fuse. The installation must comply with local electrical codes and should be carried out by a qualified electrician. The heater is not designed for outdoor use and should be installed in dry, indoor locations only.

Technical parameters

type	EWH 201
power	1000 / 2000 W
voltage	230 V
fusing	10 A
electrical protection	IP 20
heating volume	47 m3
power switching	yes
safety fuse	yes
fan	yes
summer mode / circulation	yes
freestanding	no
wall mounting	yes
product dimensions	w / h / d: 420 x 170 x 110 mm
weight	1.8 kg
warranty	2 years
EAN	8588006687385
Code	ELZ_3810
Brand	ELIZ

The EWH 201 provides two power settings (1000 / 2000 W), allowing for flexible heating depending on the ambient temperature and room size. The IP20 rating means it is suitable for indoor use only and must be protected from direct contact with water or moisture. The heater’s heat output is sufficient for rooms up to 47 m³, making it suitable for small to medium-sized rooms. The presence of a built-in fan and seasonal ventilation mode allows for air circulation even when heating is not required.Installation and connection To install the ELIZ EWH 201, the technician must first secure the mounting bracket to the wall using the provided fixings. The unit is then attached to the bracket and wired to a 230 V supply. A 10 A fuse is required to protect the circuit. The power cable is 1.5 m in length, allowing for flexible positioning. The technician must ensure the wall surface is clean, dry and free of obstructions before mounting. The heater must be installed at a height that allows for adequate air flow and safe operation. Common installation mistakes include using an undersized fuse, incorrect mounting height and failure to check the wall’s structural integrity before fixing the unit.Compatibility and accessories The EWH 201 is compatible with standard 230 V electrical systems and requires no additional accessories for basic operation. The remote control is included for adjusting settings and monitoring the LED display. No external thermostats or controllers are required, as the heater has an internal thermostat and weekly timer. The heater is not designed for integration with central heating systems and is intended for standalone use in smaller rooms. No additional components are required for installation, and the unit is supplied ready for mounting and connection.Technical background for designers The EWH 201 uses PTC ceramic heating elements, which provide rapid and even heat distribution without significant fluctuations in power output. These elements have self-regulating properties, reducing the risk of overheating and extending the heater’s service life. The built-in fan enhances air circulation, ensuring even heat distribution within the room. The heater’s internal thermostat maintains a stable temperature range between 18–45 °C. The design allows for integration into standard electrical systems without the need for additional control devices. The compact size and wall-mounting capability make it suitable for integration into modern building designs where space efficiency is a priority.Service and operation The EWH 201 requires minimal maintenance due to its sealed construction and self-regulating heating elements. The technician should periodically check the electrical connections and ensure the unit is free from dust and debris. The heater is equipped with an automatic safety cut-off that activates in the event of overheating. No scheduled service intervals are required, and the unit is designed for long-term operation with minimal intervention. The remote control and LED display allow for easy monitoring and adjustment of settings without the need for physical access to the heater’s internal components.Frequently asked questions

Can the EWH 201 be used in a bathroom?
Yes, the EWH 201 is suitable for use in dry indoor environments such as bathrooms, provided it is installed at a safe height and away from moisture sources.

Can the heater be operated in summer for ventilation?
Yes, the EWH 201 includes a summer mode that allows the fan to operate without heating, providing air circulation during warmer months.

Is the EWH 201 compatible with a weekly timer?
Yes, the heater includes a built-in weekly timer for automated operation and energy management.

Can the heater be controlled remotely?
Yes, the EWH 201 comes with a remote control for adjusting settings and monitoring the LED display without direct access to the unit.