Faced arc 15° - N - 28mm IVAR.IVN75

Product detailed description

This 15° stainless steel faced arc is commonly used in professional heating, sanitary and industrial installations. It is designed for press-fit connections and is suitable for applications such as heating circuits, fire suppression systems, compressed air systems and solar installations. The component is selected for its corrosion resistance and suitability for high-pressure environments. Installers typically use it in systems requiring directional changes while maintaining hydraulic efficiency and structural integrity.

The installation requires careful alignment and pressing to ensure a secure connection. It is often integrated into systems where space constraints or directional adjustments are necessary. The stainless steel construction ensures long-term reliability in aggressive environments, making it suitable for both indoor and outdoor applications.

Technical parameters

Installation and connection

Installation requires a press tool compatible with the IVAR press system. The component connects via a 28 mm diameter press-fit end. Before pressing, verify that the pipe ends are clean and free of burrs. Ensure the pressing tool is correctly aligned with the marked position on the fitting. A common mistake is misalignment during pressing, which can compromise the seal and structural integrity. After pressing, check for proper seating using a visual indicator. Do not attempt to reuse the fitting if the indicator is not fully engaged.

Compatibility and accessories

This faced arc is compatible with IVAR press-fit stainless steel piping systems. It requires standard press tools and matching stainless steel pipes of the same diameter. For complex systems, additional fittings such as straight couplings or other angled bends may be needed. Accessories should be sourced from the same product line to ensure compatibility and consistent performance.

Technical background for designers

The 15° faced arc allows for directional changes in press-fit piping systems. It is manufactured from 1.4404 (AISI 316L) stainless steel, known for its high corrosion resistance and durability. The press-fit connection relies on deformation of the metal to form a tight seal. Designers should consider the hydraulic impact of the bend, particularly in systems with high flow rates or long pipe runs. The material’s properties ensure long-term stability in aggressive environments and high-temperature applications.

Service and operation

Once installed, the faced arc requires minimal maintenance. Regular visual inspections for signs of wear or leakage are recommended. If the system is exposed to extreme conditions, such as frequent thermal cycling, additional checks may be necessary. There are no scheduled service intervals specified for this component. Any suspected damage should be addressed immediately by replacing the affected part.

Frequently asked questions

Can the IVN75.28 be used in fire suppression systems?
Yes, the component is suitable for fire suppression systems due to its pressure rating and material properties.

What is the maximum operating temperature of the IVN75.28?
The maximum operating temperature is +120 °C, according to the manufacturer’s technical data.

Is the IVN75.28 compatible with other IVAR press-fit components?
Yes, it is designed for use with IVAR press-fit stainless steel piping systems and requires matching press tools.

What should be checked after pressing the IVN75.28 into place?
After pressing, verify the visual indicator is fully engaged and the connection is aligned. Any deviation may affect the integrity of the joint.