Threaded filter - 5/4 "FF; 500 µm; Kv 17,00 FIV.08412

Product detailed description

Threaded filters are essential components in heating, plumbing, and irrigation systems where the removal of suspended solids is required. These filters are commonly installed in domestic and commercial buildings, including residential heating systems, industrial process lines, and water supply networks. Installers and technicians often use them to protect pumps, valves, and heat exchangers from clogging and wear caused by particulate matter in the fluid stream. The IVAR I08412114 is a robust solution for such applications, offering reliable filtration with a nominal pressure rating suitable for a wide range of system configurations.

Correct selection and installation of a threaded filter are crucial to ensure system efficiency and longevity. The filter must be sized appropriately to handle the flow rate and pressure conditions of the system. The material and pressure rating also play a role in determining the suitability of the filter for the intended application.

Technical parameters

Material	Brass CW617N
Nominal pressure	PN 20
Code	I08412114
Brand	IVAR

The nominal pressure rating of PN 20 indicates the filter is suitable for systems operating at up to 20 bar. This makes it appropriate for most heating and plumbing applications. The material, brass CW617N, is corrosion-resistant and suitable for use with water and other compatible fluids. These parameters are essential for determining the filter’s compatibility with the system pressure and fluid type.Installation and connection The IVAR I08412114 is installed using internal female thread (FF) connections. The installer must ensure that the thread type and size match the system piping. Before installation, it is important to verify the thread type and size of the connected components to avoid mismatch. Common installation mistakes include incorrect orientation of the filter, which can lead to improper flow direction and reduced filtration efficiency. The filter should be positioned in the flow path so that the fluid enters through the inlet and passes through the filter screen. After installation, a visual inspection of the connections should be performed to confirm that there are no leaks or misalignments.Compatibility and accessories This filter is compatible with systems using brass or bronze components. It is suitable for integration with standard plumbing and heating system components, including valves, pumps, and heat exchangers. No additional accessories are required for standard installation. However, in some cases, it may be necessary to use sealing materials such as PTFE tape or gaskets to ensure a leak-free connection. No related products are listed for this model.Technical background for designers The IVAR I08412114 operates by allowing fluid to pass through a fine mesh screen that captures suspended particles. The screen is designed to retain particles larger than 500 µm, preventing them from entering downstream components. The filter is constructed from brass CW617N, a material known for its durability and resistance to corrosion in water-based systems. The PN 20 rating ensures that the filter can withstand the typical operating pressures found in heating and plumbing systems. The design allows for easy maintenance and cleaning without the need to remove the entire filter from the system.Service and operation Regular inspection and cleaning of the filter screen are necessary to maintain system performance. The frequency of maintenance depends on the level of particulate matter in the fluid and the operating conditions. No specific service intervals are provided in the technical data. During inspection, the installer should check for signs of wear, corrosion, or blockage. If the filter screen is clogged, it should be cleaned or replaced to restore flow and prevent pressure drops in the system.Frequently asked questions

Can the IVAR I08412114 be used in drinking water systems?
Yes, the filter is certified for use in drinking water systems and meets the relevant standards.

Is the filter suitable for temperatures above 80°C?
No, the maximum operating temperature is specified as +80°C. Exceeding this temperature may affect the performance and integrity of the filter.

Can the filter be installed in reverse flow direction?
No, the filter must be installed in the correct flow direction to ensure proper filtration and prevent bypass of unfiltered fluid.

What is the maximum pressure rating of the filter?
The filter is rated for PN 20, which corresponds to a maximum operating pressure of 20 bar under standard conditions.