Kidde K7DCO CO detector with display

Product detailed description

CO detector with electrochemical sensor that detects carbon monoxide (CO), with LCD display and is moisture resistant. The device is powered by 2pcs of alkaline 1.5V AA batteries, which are included in the package. Kidde K7DCO - Carbon Monoxide (CO) Detector with LCD Display The Kidde K7DCO carbon monoxide (CO) detector continuously monitors the presence of poisonous carbon monoxide in homes or businesses, providing protection from its deadly effects. In addition to a trio of monitoring LED indicators, it also has an LCD display that continuously displays CO readings and other status information. The detector can be mounted securely on a wall or simply placed loose on a table, shelf or other horizontal surface for convenience. It is an ideal safety feature and reliable protection against this silent killer not only for the home, but also in rented accommodation, on holiday, when travelling in caravans, motorhomes, trailers or boats. By approval, it complies with the latest CSN -EN50291:2018 standards for home carbon monoxide detectors. The Kidde K7DCO toxic CO gas leak detector features an industrial sensor with a 10 year warranty and lifetime. This makes its operating time 40% longer than most conventional CO alarms commonly offered on our market. After 10 years of protection, the device will announce the end of its life and pass on the information that it needs to be replaced. Kidde products in the CO detection category meet the latest and most demanding criteria of the CSN -EN50291-1:2018 standard and it is no coincidence that they are among the world's top security products, relied upon for many years by the general public and professionals around the world. The K7DCO carbon monoxide detector with display is equipped with a second-generation electrochemical sensor, guaranteeing the durability and operability of the device for up to 10 years. The battery power supply using two AA alkaline batteries (included) allows the detector to be installed in the optimum location in the interior space, providing permanent protection against this silent killer. CO detector with NANOWAX conformal coating to protect the device electronics even in very humid environments. The device can thus be placed or installed, for example, in bathrooms with karma, gas boilers, boiler rooms, etc. The built-in LCD display shows the carbon monoxide concentration level from 0 to 999 ppm*. Measurements of the lethal hazard of carbon monoxide (CO) are taken by the device at one second intervals. Exceeding the permitted CO level is indicated visually (by a red LED indicator) and acoustically (by a loud, pulsating 85dB audible alarm). Kidde carbon monoxide detectors are equipped with two push buttons: - Weekly Test/Reset, which is for testing and verifying that the device is working properly and resetting it - Max Concentration, which is used to display the highest CO level measured since the device memory was reset. The device also offers a new function that informs about the alarm activation in the last 14 days, so that the user can make sure that no unwanted carbon monoxide concentration has been detected by the detector even in his absence. The status of the sensor, batteries and internal circuitry is automatically monitored by a microprocessor controlled security system. If a malfunction, any operating anomaly or low capacity of the power batteries is detected, this condition will be indicated visually by a yellow LED indicator displaying the corresponding information on the LCD display accompanied by an appropriate alarm acoustic signal. In addition, the Kidde K7DCO detector is equipped with a simulation test function to quickly check the correct response of the CO sensor to the test gas. Thanks to the special design, it is not necessary to install the device firmly on a wall in the room, but it is also possible to freely place the detector on flat surfaces such as a bedside table, shelf, etc. The design of the shock-resistant housing and battery power supply has enabled the detector to be approved for use not only in houses and apartments, but also in caravans, motorhomes and boats. Carbon monoxide is a colourless, tasteless and odourless gas that is produced by the misfiring of fossil fuels such as coal, oil, natural gas, LPG and wood. It can also be produced by poorly maintained or faulty fuel-burning appliances used for domestic heating, such as: boilers, gas appliances, karmas, barbecues, blocked chimneys, ventilation systems or damaged flue pipes. Common symptoms of CO poisoning include headaches, nausea, fatigue or muscle pain - but these can easily be confused with a diagnosis of flu. It is therefore important to protect your family and home with carbon monoxide detectors. Testing the Kidde K7DCO detector The best way to test and maintain a CO detector sensor in working order is through a test kit with SAFE 400 calibration gas. This test gas verifies that the detector's circuitry and systems are operating reliably and that the CO sensor is actively responding to the appropriate level of carbon monoxide concentration. Advantages of the device - Kidde electrochemical technology - second-generation sensors, the most accurate electrochemical sensors in the world, take measurements at one-second intervals - 40% longer sensor life than other manufacturers on the market - NANOWAX layer protects the device electronics against moisture - LCD display with a maximum range of 999 ppm - Loud 85 dB alarm signaling - Test/Reset function - reset, test and verify proper device operation - Peak /Level function - to display the highest measured CO level in the device memory - Alarm activity function for the last 14 days - Battery powered with approval for use in caravans, motorhomes and boats - Shock-resistant housing design - Wall or free standing installation on a flat surface - End-of-life device signal - Low operating costs, small size and weight - Easy installation and handling - Timeless and modern design - 10-year warranty (not applicable to power batteries) Carbon monoxide detection device with certification confirming compliance with the requirements of the Czech technical standard ČSN-EN EN50291-1:2018 for home carbon monoxide detectors. Compliance with this standard has been confirmed by the independent research laboratory of the British Standard Institute (BSI). *for concentrations in the range 0 - 30 ppm, the marking is "0". Product specifications - Sensor technology: electrochemical Kidde technology - patent pending, one of the most accurate technologies in the world. - Sensor lifetime: 10 years - Power supply: DC; two 1.5 V alkaline AA batteries (included) - Mounting method: on the wall (screws and dowels included) or free on a flat surface. - Acoustic alarm 85 dB (at a distance of 3 m; 3.0 - 3.5 KHz), optical indication (red LED) with information on the display about the detected concentration (the display shows the CO concentration in the range 0 - 999 ppm). - End-of-life notification: Acoustic alarm tone (double short beeps every 60 seconds), optical indication (yellow LED flashes twice every 60 seconds) with "End" information on the detector display. - Fault indication: Acoustic alarm tone (continuous tone or short beep every 30 seconds), optical indication (yellow LED flashes every 30 seconds) with "Err" information on the detector display. - Alarm activation memory: the red LED flashes every 60 seconds if the device has detected a CO concentration of 100 ppm or higher in the last 14 days. - Test/Reset Button: Used to operate and control the device. When the button is pressed, the device will perform a check test of the device's electronics. It is also used to reset the measured values in the device's memory or to silence the alarm during an alarm. - Peak /Level button: When the button is pressed, the display shows the values of the highest measured CO level stored in the detector's memory in the range of 11 - 999 ppm - Display: LCD display (showing values in the range 0 - 999 ppm) - Dimensions: 119mm x 72mm x 40mm - Weight with batteries: 0.168 kg - Approval: EN50291-1:2018 and Part 2 (caravans, motorhomes and boats) - CE marks - Warranty: 10 years (does not apply to power batteries) Operating conditions: Temperature: -10 °C - +45 °C Humidity: up to 90% relative humidity (RH) non-condensing Storage conditions: Temperature: -20 °C - +60 °C Humidity: 5% - 95% RH - non-condensing Package contents 1x carbon monoxide detector with LCD display - Kidde K7DCO model 1x mounting bracket 1x wall mounting kit 2x 1.5 V AA alkaline batteries Manual