MikroTik RBLtAP-2HnD&R11e-LTE&LR8, LtAP LR8 LTE kit

Product detailed description

The LtAP LR8 LTE kit is a compact wireless access point with LTE and LoRa network support - perfect for busy urban environments and standalone installations. It includes a built-in modem for LTE-enabled mobile networks and a modem for LoRa networks. The 2.4GHz wireless connection with modulation speeds up to 300Mbps will provide fast enough LTE network access for your mobile devices. You can connect your fixed devices via a 1Gbit eth port. You can achieve download speeds of up to 150Mbps on the LTE network. The device offers several power supply options - DC jack, PoE and an industrial connector suitable for connection in a vehicle, for example. The LtAP is also equipped with a serial port that gives you access to the console for debugging. A full-size USB port is also fitted for connecting other devices. Durable chassis The rubberized and extremely durable case with special wall mount is perfect for almost any installation: from mass transit to food trucks or logistics areas to environments with harsh conditions such as extreme heat or freezing temperatures. LtAP can be exposed to temperatures from -40°C to +70°C. The built-in GPS chip also makes it the perfect solution for real-time vehicle tracking. MikroTik provides a simple example application in the RouterOS documentation to help get you started. 3 mini-SIM slots are fitted to save you time and money. They allow you to move your vehicle really anywhere. More than LTE The R11e-LTE modem supports the following international LTE bands: 1,2,3,7,8,20,38 and 40. The new LtAP is more than just a simple access point - it's a device that will always be where you need it to be. LoRa network support The unit uses the last available miniPCIe slot for a LoRa modem, which supports frequencies from 863 - 870MHz and is a complete out-of-the-box solution for use as a gateway to a LoRaWAN. The device includes a pre-installed R11e-LoRa8 module for forwarding UDP packets to any public or private LoRa server. What is LoRa good for? LoRa is a wireless data transmission solution where the main goal is to consume as little power as possible at a low acquisition cost and a small data rate is sufficient. MikroTik LoRa products are ready (not only) for The Things Network global network - a well-known open source infrastructure that provides LoRa network coverage and thousands of useful applications. With the help of The Things Network, you can get started with the Internet of Things in a single day. You can also easily upgrade to The Things Industries enterprise solution. Package contents - Device with R11e-LTE and R11-LoRa8 - Power adapter - DC cable - Installation kit Technical parameters Wireless features Wireless frequencies: 2.4 GHz, 863-870 MHz, LTE WiFi standards: 802.11n, 802.11b/g Transmission speed - 2.4GHz [Mbps]: 300 2.4GHz transmit power [dBm]: 25 2.4GHz MIMO: 2 x 2 Antenna Type: Built-in Antenna Gain [dBi]: 2.5 Integrated 4G/LTE radio part: Yes Supported 4G/LTE channels: (1) 2100 MHz, (2) 1900 MHz, (3) 1800 MHz, (7) 2600 MHz, (8) 900 MHz, (20) 800 MHz, (38) 2600 MHz, (40) 2300 MHz Connectors and interfaces LAN speed: (1) 10/100/1000Mbps Gigabit LAN: Yes Serial port: RS-232 Number of miniPCI-e slots: 2 SIM card slot: Yes Number of SIM slots: 3 USB: Yes Power supply Power supply via PoE: 12 .. 30V DC PoE types: PoE-In (only) Max. power consumption [W]: 25 Power supply via connector/socket: 12 .. 30V DC Physical characteristics Design: Outdoor Buttons: Reset Operating temperature [°C]: -40 to 70 Width [mm]: 162 Height [mm]: 170 Depth [mm]: 40 Hardware CPU: MT7621A CPU frequency [MHz]: 880 Number of CPU cores: 2 Internal storage [MB]: 16 RAM [MB]: 128 Software Operating System: RouterOS - L4 IPv6 support: yes Default IP address: 192.168.88.1 Default username and password: admin / -